Magic Chef MCD1611ST - Manual (Page 12)

11
COOKING IN TWO STAGES
All recipes require frozen foods to be defrosted fully before cooking.
This oven can be programmed to automatically defrost foods before cooking.
When you press START pad, the DEFROST and M/W indicators come on to confirm the power levels
selected. The DEFROST indicator starts blinking to show you that the oven is in DEFROST mode.
The display counts down the time remaining in DEFROST mode.
When the oven beeps, turn over, break apart and/or redistribute the food. At the end of DEFROST mode,
the oven will beep and start M/W cook. The DEFROST indicator goes off and the M/W indicator starts
blinking. The display counts down the time remaining in M/W cook.
When M/W cook ends, you will hear 3 beeps.
1. Press DEFROST pad.
2. Press number pads for the defrosting time you want.
4. Press number pads for desired cooking time.
5. Press START pad.
The DEFROST indicator lights and “ : 0” is
displayed.
The display will show the numbers in the
order you entered.
The M/W indicator lights and “P-HI” is
displayed. The display will show what you
pressed.
This example shows power level 5.
The display will show the number in the
order you entered.
COOKING IN ONE STAGE
When you press START pad, the M/W indicator starts blinking to show the oven is cooking.
The display counts down the time to show how much cooking time is left. When the cooking time ends,
you will hear 3 beeps.
1. Press POWER pad.
(Select desired power level.)
x6
x6
2. Press the number pads for the cooking time.
3. Press START pad.
The M/W indicator lights.
The display will show what you selected.
This example shows power level 5.
The display will show the numbers in the
order you entered.
NOTE: Using lower power levels increases the cooking time which is recommended for foods such
as cheese, milk and slow cooking of meats.
NOTE: If steps 1and 2 are omitted, the
oven will cook at full power.
NOTE: Your oven can be programmed
for 99 minutes 99
seconds.(99:99)
POWER
DEFROST
POWER 3.Press POWER pad.
(Select desired power level.)