Installation – Marshall electronic V-R151PV-R151P User Manual
Page 4
3) VIDEO
4) OSD ( On Screen Display) control
Press Menu
Select (System Setting)
Select OSD U/D) or OSD L/R)
use the UP, DOWN keys
5) System Control Menu Tree
PC
TV
COMPOSITE
S-VHS
HORIZONTAL PAN
0
VERTICAL PAN
0
VALUE DEFAULT
0
0
0
0
CHANNEL ADD / REMOVE
0
TV=AIR CH
0
MODE
0
0
INPUT CONDITION
0
VOLUME ADJUSTMENT
0
0
0
BRIGHTNESS
0
0
0
0
CONTRAST
0
0
0
0
HUE
0
0
0
COLOR
0
0
0
Page 10
1. Installation
1) Before Installation
nBefore using your monitor, make sure to read this manual carefully. In case of any problems
with installation, contact Marshall Electronics.
nThe monitor should be handled with caution and not be exposed to impact or shock.
nThe display area is highly prone to scratches. Use cleaner suggested by the authorized
service center.
nDo not expose the monitor in high temperature or in high humidity.
nThere are no user serviceable parts inside your monitor. To avoid risk of electric shock, do not
open your monitor case!
2) Components
Rackmountable TFT LCD Monitor- 1 pc
DC Power Supply Adapter -1 pc
Power Cable 1- pc
Computer Cable 1 pc
3) Operation
Multiple Input Terminal
4) Tally
The V-R151P comes with a tally light installed at the top right-hand corner of the unit. The light
is operated by inserting a 2.5mm plug into the jack marked ‘TALLY’ on the rear of the unit. The
light will come on by closing the two contacts together. DO NOT GIVE POWER TO THIS
PLUG IT IS SELF-POWERED.
5) Mounting
The V-R151P is designed to fit in a
EIA standard 19” rack. It requires 6
rack units of vertical space and is
secured with eight screws. It may be
necessary to center the unit up or
down so that it does not touch any
adjacent units when the unit is tilted
up or down.
Page 3