Mountain Hardwear Satellite - Manual (Page 9)

Satellite - 8
Instructions for guying out your tent using Line-Lok™ cord
cleats. Use cord 2 – 5 mm in diameter.
1.
Feed cord through cord cleat and secure as per Figure A
below. When complete, assembly will appear as in Figure B.
2.
To tension the cord, slide the cleat
towards the tent
(Figure C).
3.
To release tension, pull the cords
apart (Figure D).
Use your internal guy system for extreme weather conditions
and high winds. The internal guy system consists of pieces of
cord (96” long) and cord cleats (Figure 11). As the wind increas-
es, increase the tension by tightening the cord cleats
.
Figure 11
Figure A
Figure B
to tent
to anchor
Figure C
Figure D