Enable/disable bookland ean, Decode upc/ean/jan supplementals – Motorola LS4208 User Manual

Page 157

Advertising

Symbologies 12 - 9

Enable/Disable Bookland EAN

To enable or disable Bookland EAN, scan the appropriate bar code below.

Decode UPC/EAN/JAN Supplementals

Supplementals are additionally appended characters (2 or 5) according to specific code format conventions (e.g.,
UPC A+2, UPC E+2, EAN 8+2). The following options are available:

•

If you select Ignore UPC/EAN with Supplementals, and the scanner is presented with a UPC/EAN plus
supplemental symbol, the scanner decodes UPC/EAN and ignores the supplemental characters.

•

If you select Decode UPC/EAN with Supplementals, the scanner only decodes UPC/EAN symbols with
supplemental characters, and ignores symbols without supplementals.

•

If you select Autodiscriminate UPC/EAN Supplementals, the scanner decodes UPC/EAN symbols with
supplemental characters immediately. If the symbol does not have a supplemental, the scanner must decode
the bar code the number of times set via

UPC/EAN/JAN Supplemental Redundancy on page 12-14

before

transmitting its data to confirm that there is no supplemental.

•

If you select one of the following Supplemental Mode options, the scanner immediately transmits EAN-13
bar codes starting with that prefix that have supplemental characters. If the symbol does not have a
supplemental, the scanner must decode the bar code the number of times set via

UPC/EAN/JAN

Supplemental Redundancy on page 12-14

before transmitting its data to confirm that there is no

supplemental. The scanner transmits UPC/EAN bar codes that do not have that prefix immediately.

•

Enable 378/379 Supplemental Mode

•

Enable 978/979 Supplemental Mode

Enable Bookland EAN

Disable Bookland EAN

NOTE

If you enable Bookland EAN, select a Bookland ISBN Format on page 12-21. Also select