Memorex MT2251 - Manual (Page 3)

LOCATION OF CONTROLS
This TV can display the channel number, on screen displays and picture adjustments on the
screen in English, Spanish or French.
On-screen language selection (step 3) will automatically appear on the screen when you press
the MENU button initially. Select language to use the other menu options.
NOTE:
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language,
but the Closed Caption text will not be affected by the language selection.
Press the MENU button.
Press the SET + or – button to select the LANGUAGE
mode, then press the ENTER button.
Press the SET + or – button until the " " indicator
points to the desired language: English (ENGLISH),
Spanish (ESPAÑOL) or French (FRANCAIS), then
press the ENTER button.
Press the MENU button again.
3
4
1
2
CH (CHANNEL) ▲ and ▼ buttons
Press and release the CH (CHANNEL) ▲ or ▼ button. The channel automatically stops
at the next channel set into memory. Press and hold the button down to change channels
more quickly.
For proper operation, before selecting channels, they should be set into the TV's
memory. See "To Memorize Channels".
DIRECT CHANNEL SELECTION buttons (0-9) - Press these buttons to select a
channel.The channel number will appear on the upper right corner of the TV screen. If an
invalid channel number is selected, the display will revert to the original channel.
TV MODE DIRECT CHANNEL SELECTION - When the TV/CATV menu option is in the
TV position, all channels can be instantly selected by using two buttons. (For example, to
select channel 2, press "0", then "2". If you press only "2", channel selection will be
delayed for a few seconds). For channels 10 and above, press the 2 digits in order.
CATV mode direct channel selection -
When the TV/CATV menu option is in the CATV position, channels can be selected as
follows:
1-9
10-19
20-99
100-125
Press "0" twice, then 1-9 as needed.
(Example, to select channel 2, press 002)
Press "0", then remaining 2 digits.
(Example, to select channel 13, press 013).
Press the 2 digits in order.
(Example, to select channel 36, press 36).
Press the 3 digits in order.
(Example, to select channel 120, press 120).
To turn on the TV, press the POWER button.
The Volume can be adjusted to a desired level by pressing the VOL (VOLUME) ▲ or ▼
button.
The sound level will be indicated on the TV screen by GREEN BARS AND A NUMBER.
As the sound level increases, so do the number of BARS AND THE NUMBER on the
screen. The same is true for decreasing the level.
Set the TV/CATV menu option to the appropriate position. When shipped from the
factory, this menu option is in the CATV setting. See "To Memorize Channels".
TV OPERATION
1
2
TV - VHF/UHF channels
CATV - CABLE TV channels
3
4
NOTE FOR CHANNELS 1-19:
If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 4
seconds.
SETTING LANGUAGE
NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off
after 15 minutes.
CLOSED CAPTION
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display Closed Captioned television programs.
Closed Captioning will display text on the screen for hearing impaired viewers or it will translate
and display text in another language.
CLOSED CAPTIONING WITH A VCR
Closed Captioned programs can be recorded and played back on a VCR with the Closed
Captioned text intact. The Closed Captioned text will disappear during Cue (Fast Forward
Search), Review (Rewind Search) and Pause Modes or if the VCR tracking is not adjusted
properly.
Captions: This Closed Caption Mode will display text on the screen in English or another
language (depending on the setting of the Closed Captions CH. 1/2 button). Generally, Closed
Captions in English are transmitted on Captions Channel 1 and Closed Captions in other
languages are transmitted on Captions Channel 2.
Text: The Text Closed Caption Mode will usually fill 1/3 of full screen with a programming
schedule or other information. After selecting a Closed Caption Mode, it will stay in effect until
it is changed, even if the channel is changed. If the Captions signal is lost due to a commercial
or a break in the signal, the Captions will reappear when the signal is received again. If the
channels are changed, the Captions will be delayed approximately 10 seconds.
The Captions will appear in places on the screen where they will least interfere with the picture,
usually on the bottom of the screen. News programs will usually show three-line Closed
Captions which scroll onto the screen. Most other shows provide two or three lined Captions
placed near the character who is speaking so the viewer can follow the dialogue.
Words in italics or underlined describe titles, words in foreign languages or words requiring
emphasis. Words that are sung usually appear enclosed by musical notes.
For television programs broadcasting with Closed Captions, look in your TV guide for the
Closed Captions symbol (CC).
• When activating the Closed Captioned Decoder, there will be a short delay before the
Closed Captioned text appears on the screen.
• Closed Captioned text is only displayed in locations where it is available.
• If no caption signal is received, no captions will appear, but the television will remain in
the Caption Mode.
• Misspellings or unusual characters may occasionally appear during Closed Captioning.
This is normal with Closed Captioning, especially with live programs. This is because
during live programs, captions are also entered live. These transmissions do not allow
time for editing.
• When Captions are being displayed, on-screen displays, such as volume and mute may
not be seen or may interfere with Closed Captions.
• Some cable systems and copy protection systems may interfere with the Closed
Captioned signal.
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder
may not appear or may appear with strange characters or misspelled words. In this
case, adjust the antenna for better reception or use an outdoor antenna.
Press the SET + or – button to select the V-CHIP SET option, then press the ENTER button.
Enter your password using the Direct channel selection buttons.
In the event of entering incorrect password press the RESET button. Then press the
ENTER button.
Enter the same password for confirmation, then press the ENTER button.
Press the SET + or – button to select the V-CHIP option.
Press the ENTER button to select the ON.
Press the SET + or – button to select the TV RATING or MOVIE RATING option. Press
the ENTER button.
Press the SET + or – button to select the desired rating for the applicable video or TV
channel. Press the ENTER button.
1
5
7 Press the MENU button three times to return to normal TV viewing.
TV-Y
TV-Y7
TV-G : all children
: 7 years old and above
: childrens program TV-PG
TV-14
TV-MA : parental guidance
: 14 years old and above
: 17 years old and above
6
When you select TV-Y7, TV-PG, TV-14 or TV-MA, press the CALL button to show the
contained rating.
Press the SET + or – button to select the the desired item you want. Press the ENTER button
to select the OFF.
: all ages
: parental guidance
: parental guidance
less than 13 years old
G
PG
PG-13 R
NC-17
X
SETTING V-CHIP
This TV is fitted with a V-CHIP controller which provides you with channel viewing access
controls and restrictions.
OFF TV-Y7 TV-G TV-14 TV-MA
SET – SET +
TV–Y TV-PG
TV RATING
4
3
2
MOVIE RATING
OFF PG PG-13 R NC-17
SET – SET +
X G
: under 17 years old parental
guidance suggested
: 17 years old and above
: adult only
NOTES:
• The V-Chip function is activated only on programs and tapes that have the rating signal.
• Once you block a program using the V-Chip function, the blocked program cannot be
watched based on the content of the show. When the program starts, the "ENTER
PASSWORD" will appear on the screen. When you want to release the V-Chip temporarily,
enter the password.
If you change the channel or turn off and on the TV while releasing the V-Chip temporarily,
the V-Chip setting will be resumed.
• When you watch the TV from the cable box or the VCR with the RF Modulator, then you
release the V-Chip temporarily, the V-Chip setting will not be resumed until you turn off the TV.
The TV channel is not used in this case.
• When changing the channel with the cable box or the VCR, approximately 10 seconds will
pass until the program appears.
FRANCAIS
ENGLISH
ESPAÑOL
PRESS : + / – / ENTER / MENU
LANGUAGE / LENGUA / LANGUE
LANGUAGE
CH SET
PICTURE
V-CHIP SET
PRESS : + / – / ENTER / MENU
MENU
1. Power Button - Press to turn the TV on or off.
2. Volume
▲ / ▼ Buttons - Press to raise or lower the volume of the sound.
(MENU Buttons) - Press the both button to display the On- Screen menu function.
(SET+/– Buttons) - Press the select the desired setting during On-Screen operations.
3. Channel ▲ / ▼ Buttons - Press to select a higher or lower numbered channel set into
memory.
(ENTER Buttons)- Press to enter or select information for On-Screen operations.
(RESET Buttons) - Press to reset the On-Screen picture adjustments to their factory preset
positions.
4. Remote Sensor - Signals from the Remote Control unit are received here.
1 2 3 4
3I0-0101A E 1/1/32, 09:50 4