Magellan MG32WK - Manual (Page 2)

Bypassed zones remained unarmed when the
partition is armed.
1. Press the [ BYP ] key.
2. Enter your [ ACCESS CODE ].
3. The corresponding LED of all bypassed
zones will illuminate. Select the zone(s)
you want to bypass/unbypass by
entering the two-digit zone number (i.e.
zone 3 = 03).
4. Press the [ ENTER ] key to save and exit.
B YPASS P ROGRAMMING
© Paradox Security Systems Ltd., 2005-2007. Magellan
is a trademark or registered trademark of Paradox
Security Systems Ltd. and its affiliates in Canada, the
United States and/or other countries. All rights reserved.
paradox.com
PRINTED IN CANADA 03/2007 MG32WK-EQ01
To send a silent or audible alarm to your
Security Company, press and hold one of the
button combinations listed for 3 seconds.
When a trouble condition occurs, the [ TBL ] key
will illuminate.
1. Press the [ TBL ] key. The key will flash
and number(s) corresponding to the
trouble(s) will illuminate.
2. Read the corresponding explanation of
the trouble from the trouble list on the
keypad door label.
3. Press the [ CLEAR ] key to exit.
To view the alarms that occurred during the
last armed period:
1. Disarm the system.
2. Press the [
MEM ] key.
3. The corresponding zone numbers that
were in alarm the last time the system
was armed will illuminate.
4. Press the [ CLEAR ] key to exit.
To mute the keypad:
Press and hold the [ CLEAR ] key for 10
seconds to enable or disable Keypad
Muting.
To modify the backlight:
1. Press and hold the [ ] key for 3
seconds.
2. Press the [ ] key to set the desired
backlight level.
3. Press [ CLEAR ] or [ ENTER ] to exit.
P ANIC A LARMS
Panic Alarm Type Button Combinations
Non-medical
emergency
Auxiliary
Fire Press [1] & [3]
Press [4] & [6]
Press [7] & [9]
T ROUBLE D ISPLAY
A LARM M EMORY D ISPLAY
K EYPAD S ETTINGS