Morphy Richards 29005 - Manual (Page 2)

Maintenance
Do not expose your cd clock radio to extremes of temperature. The product should
be kept in a warm environment free from dust and damp. For external cleaning
use only a soft, clean, damp cloth. Use of detergents may damage the finish.
Technical specification
AC Power supply : 230v 50Hz
Battery back-up : 9V DC type 6LR61/PP3 (not included)
CD player : Frequency response (3dB) 100Hz to 18kHz
Laser : = 780nm Max power = 5mW
Radio : FM 88Mhz - 108Mhz
: MW 540Khz - 1600Khz
Earphone socket : 3.5mm
WARNING : This unit uses a laser beam. To prevent an accident occuring the
unit should only be opened by a qualified engineer. If the door interlocks become
defective the laser may cause invisible radiation. Avoid exposure to the beam.
If there is a scratch, dirt or finger prints on the cd, it may cause tracking errors.
Before playing, clean the cd with a clean cloth. Wipe the cd from the centre
outwards. After playing, store the disc in its cd case.
For indoor use only.
Warning labels
WARNING: to reduce the risk of electric shock, do not expose this appliance
to rain or moisture.
Guarantee
Morphy Richards products are manufactured to internationally accepted quality
standards. In addition to your statutory rights, Morphy Richards guarantee your
product to be free from manufacturing and component defects for a period of TWO
YEARS from date of purchase.
If your product proves to be defective within 28 days of purchase, your Morphy
Richards dealer from whom the product was purchased will be pleased to replace it
free of charge.
Should your product develop a defect within the guarantee period but after the
replacement period, please return the product to the following address, together with
the proof of purchase, brief details of the symptoms and your own name and
address.
After Sales Division
Morphy Richards Limited
Talbot Road
Mexborough
South Yorkshire
S64 8AJ
Your post office will provide a certificate of posting. The product will be repaired
and returned to you promptly.
Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri) UK 0870 060 2614
Republic of Ireland 1800 409119
Replacement parts 0870 167 6645
Morphy Richards Website: www.morphyrichards.co.uk
446/8001/95 Rev 1
Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ
P.5 P.6
P.7
Other cd functions
SKIP/FAST REVERSE SEARCH
1 Press once to skip to the next track or as many times as required to
reach desired track. Press the to return to the beginning of the current
track or as many times as required to go back to desired track. Press or
and hold for fast search within the current track.
REPEAT button
1
Press once to repeat the track. The repeat indicator will flash.
2 Press again for the whole cd to be repeated, the repeat indicator will light up.
3 Press again to cancel the repeat function. Repeat LED indicator will go
out.
RANDOM
1
Press P. mode button once for random playback of all cd tracks. If a
program has been set press twice. The random LED indicator will light up.
2 Press again to cancel the function.
Repeat and random modes can be used simultaneously.
When the cd compartment is empty or a cd is incorrectly loaded or damaged the
‘no’ (no disc) symbol will be displayed.
Setting alarm
The unit allows you to select two different wake-up times that can be used
separately or simultaneously (ALARM 1 OR 2 OR ALARM 1 and 2).
Before setting the alarm, switch the alarm selector switch to either alarm 1 or
alarm 2 or alarm 1 and 2.
ALARM 1: Press and hold the alarm 1 button, and then or to set the
desired wake-up time. Release alarm button to save the setting.
ALARM 2: Press and hold the alarm 2 button and proceed as above.
Set the function selector switch to AUTO, (then set function selector switch to
either MW or FM for radio or cd for cd music) BUZZ (for buzzer) or OFF to
cancel alarm.
Waking up to the radio
1 Follow the instructions given under ‘Radio operation’ to select the desired
radio station.
2 Set ALARM function switch to AUTO alarm indicators will light
up. Then set function selector switch to either MW or FM.
Waking up to cd music
1 Follow steps 1 to 3 of the ‘playing cd’ procedure.
2 To wake up to your favourite cd track, press and release the PTS button and
then press
or until desired track number is saved. Press the PTS
button to store. Repeat for up to 20 tracks. Wait until the clock reverts back
to the time or press the time button. Press PLAY mode button twice and the
program indicator will light up. The PTS button can be pressed at any time to
check track selection.
3 Press the POWER on/off button the power indicator will go out.
4 Set the ALARM selector switch to AUTO; the alarm indicators will
light up. At the wake time, the unit will playback the whole cd unless the
REPEAT mode is selected. The player will remain in operation for about 1
hour. To stop playback, press the POWER on/off button.
Note: PTS button can be used to program 20 different tracks.
Waking up to buzzer
Set alarm selector switch to BUZZER; the alarm indicators will light.
How to cancel the alarm
The alarm is programmed to sound for 1 hour.
1
SNOOZE; press this button to temporarily stop the alarm . The alarm will
sound again 6 minutes later.
2 POWER on/off; Press to stop the alarm, the alarm will sound again 24
hours later.
3 Switch alarm selector switch to the off position to cancel alarm permanently,
indicators will disappear.
Sleep to music
1 Select the function selector switch to the desired mode CD/MW/FM.
2 Press the sleep button and the display will indicate --, press again for 90, 60,
30 minutes to set the sleep time.
3 Note: for the cd to start playing, press the play button.
4 Press the POWER on/off button to cancel the music before the end of the
programmed duration.
Note; If cd contents are shorter than the selected sleep time, playback will stop
at the end of the cd unless the REPEAT mode has been activated.
ATTENTION: To reduce the risk of electric shock, do not
remove the cover. There are no user serviceable parts inside
the unit. Refer any servicing to qualified personnel.
The lightning flash with arrowhead symbol within the triangle is a warning
sign alerting the user of ‘dangerous voltage’ inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of
important instructions accompanying the product.
To prevent fire or shock hazard do not expose this apparatus to dripping or
splashing. Morphy Richards products are intended for household use only.
Morphy Richards has a policy of continuous improvement in product quality and design.
The company, therefore reserves the right to change the specification of its models at any time.