Mordaunt-Short MS907W - Manual (Page 6)

AUTO
+ +
+ +
- -
- -
POWER
MIN MAX
50Hz 150Hz
L R
HIGH LEVEL INPUT
(FROM AMPLIFIER)
CAUTION: SERIAL NUMBER REMOVED
www.mordaunt-short.co.uk
HIGH LEVEL OUTPUT
(TO SATELLITE SPEAKERS)
LEVEL
FREQUENCY
PHASE
LINE INPUT
LINE OUTPUT
L R
L R
R L
STANDBY
180 0
MS907 W SUBWOOFER
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE REPLACE ONLY WITH SAME TYPE T1A 250V FUSE BS4265/IEC127
Max Power Consumption: 250W
RISK OF ELECTRIC SHOCK DO NOT OPEN
RISQUE DE CHOC ELECTRIQUENE PAS OUVRIR
VORM ÖFFNEN DES GERÄTESNETZSTECKER ZIEHEN
Power Rating: 220-240V AC 50Hz
CAUTION:
AVIS:
ACHTUNG:
ON
OFF O O
l l
ON
1. Level
This control allows you to adjust the volume of low
frequency output from your subwoofer amplifier to obtain
the best sound-balance within your surroundings
2. Frequency
This is used to adjust the point at which the crossover will
separate the low frequencies being used by the subwoofer
from the higher frequencies played by the rest of the
system. Raising the Low Frequency Cut-Off will increase
the frequency range that the MS907W will reproduce.
Lowering the Low Frequency Cut-Off will limit the range of
frequencies reproduced.
3. Phase
This allows you to optimise the phase of your MS907W to
different listening positions and that of other speaker
systems used at the same time.
4. Line Input
If your amplification system has a dedicated subwoofer line
output it should be connected here (see fig.1 opposite).
5. Line Output
This connection can be used if an additional subwoofer is to
be added to your system
Subwoofer Controls
6
1
2
3
4
5
6
7
8
9