Monarch Instrument Net 9825 - Manual (Page 3)

3
3. Press Enter/Pause to select the internal port. After setting the port to
internal, change the MODE to enable bi-directional communications.
4. Press l or r until you see
PARALLEL COMM
l Mode
5. Press Enter/Pause. You will see
MODE
Compatible r
6. Press r to display the other option, IEEE1284 and press Enter/Pause.
This selects IEEE1284 for bi-directional Ethernet communications.
(Compatible mode is used with a computer connection and a parallel
cable.)
C o n f i g u r i n g t h e P r i n t S e r v e r
Software is available on Monarch's Web site (www.monarch.com) to
configure the print server or you can order part number TC9840ENCD for the
MonarchNet

Utilities compact disc. It can also be configured using HP Jet
Admin

or HP Web JetAdmin

software.
A Technical Reference Manual, which includes additional Ethernet set-up
and configuration information, is also available on our Web site. You can
also order part number TC9800ENTR for a printed copy of the Technical
Reference Manual.
When turning on the printer or after sending a ^PR
(printer reset) immediate command, wait at least eight (8)
seconds before sending data to the print server. Any
data sent to the print server before the 8-second interval
may be lost.