Marantz DV4001 - Manual (Page 12)

Connecting Up 2
12
REMOTE CONTROL
Ver 1.0 AUDIO
L
COMPONENT
B
R Y
C COAX. HDMI
OUT
IN
ANALOG
AC IN
RS-232C
S1
FLASHER
IN
VIDEO
C
R
A/V EUROCONNECTOR
1
3 2
INT. EXT.
COAX
Connecting analog audio cables
Be sure to fully insert each plug for the
best con nec tion. The plugs and jacks are
color-coded to make con nec tion easier.
Connecting coaxial cables
Use an interconnector with a pin-type
(also called RCA
or phono) plug on
each end to connect
up digital coaxial-
type jacks. Make
sure that the plug is
pushed fully home.
Home theater audio connections
This player outputs multi-channel audio
in digital form. Check the manual for your
amplifi er/receiver to see what equipment it
is com pat i ble with (especially which digital
formats such as Dolby Digital, DTS, etc. It
can decode).
Important
• Before making or changing any rear panel
connections, make sure that all com po nents are
switched off and unplugged from the wall outlet.
• While a connected component is turned on,
do not unplug the power cord of this DVD
player from the wall outlet. The speaker may be
damaged.
If your amplifi er has stereo
inputs only, connect them here.
Connect to the coaxial input
of your amplifi er, if it has
digital inputs. Plug into a standard
AC wall outlet.