Link switches, Routing audio inputs with the link switches, Input impedance for linked channel inputs – Meyer Sound MPS-488HP User Manual

Page 11

Advertising
background image

MPS-488HP OPERATING INSTRUCTIONS

11

Link Switches

Link switches determine how Channel Inputs are routed to
Channel Outputs. When a Channel Input’s Link switch is
OFF (set to the down position), the input is only routed to its
corresponding output: for example, Channel Input 1 routed
to Channel Output 1. When a Link switch is ON (set to the
up position), the input is routed to its corresponding output
and the next adjacent output: for example, Channel Input 1
routed to Channel Output 1 and Channel Output 2. If multi-
ple, adjacent Link switches are enabled, the input is routed
to each adjacent output: for example, Channel Input 1
routed to Channel Outputs 1, 2, and 3.

NOTE:

Channel Inputs are inactive when the

Link switch for the preceding Channel Input is

enabled. Connections should not be made to inactive
Channel Inputs.

Routing Audio Inputs with the Link Switches

The following examples illustrate several common routing
applications for the MPS-488HP.

Routing One Input to Eight Outputs

To route one Channel Input to eight Channel Outputs:

Set all Link switches to ON.

Routing Two Inputs to Four Outputs Each

To route two Channel Inputs to four Channel Outputs each:

1. Set the Link 4 switch to OFF and all other Link switches

to ON.

Routing Eight Inputs to Eight Separate Outputs

To route eight Channel Inputs to eight separate Channel
Outputs:

Set all Link switches to OFF.

Input Impedance for Linked Channel Inputs

When a Link switch is enabled, the Channel Input’s unbuf-
fered source signal is transmitted in parallel to each linked
Channel Output. This causes the Channel Input’s imped-
ance (normally 10 kOhms for one loudspeaker) to be
reduced for each linked output. For example:

1 Channel Output, 10 kOhm input impedance

2 Channel Outputs, 5 kOhm input impedance

4 Channel Outputs, 2500 ohms input impedance

8 Channel Outputs, 1250 ohms input impedance

MPS-488HP Link Switches

Link 1

Link 2

Link 3

Link 4

Link 5

Link 6

Link 7

On

On

On

On

On

On

On

1

2

3

1

1

1

1

4

6

7

8

5

1

1

1

1

Link 1

Link 2

Link 3

Link 4

Link 5

Link 6

Link 7

On

On

On

Off

On

On

On

Link 1

Link 2

Link 3

Link 4

Link 5

Link 6

Link 7

Off

Off

Off

Off

Off

Off

Off

1

2

3

1

1

5

5

4

5

6

7

8

1

1

5

5

1

2

1

3

5

7

4

5

6

8

3

7

2

4

6

8

Advertising