Refilling the mixed drink maker – Margaritaville Margariville MD 3000 Series User Manual
Page 11
-8-
Refilling the Mixed
Drink Maker
™
once any liquor or juice falls below the top surface of the basin cover,
it’s time to refill the tank.
to refill the juice tanks:
1.
pull juice tanks from the basin cover.
2.
twist the tank caps counter clockwise to remove and clockwise to replace.
3.
refill tanks with pre-chilled juice for the best results.
4.
re-install the juice tanks.
to refill the liquor tank:
tiP: Purchase extra liquor tanks from our website and have pre-chilled liquor
tanks ready to go! www.margaritavillecargo.com
option 1 –
Refill the tank with the same liquor.
1.
pull the liquor tank from the basin cover (the machine will recognize that it
has been removed).
2.
twist the tank caps counter clockwise to remove and clockwise to replace.
3.
refill the tank with the same liquor as before.
4.
select your liquor on the display screen, which will confirm your chosen liquor.
5.
Install the liquor tank. the machine will automatically load the same recipes.
option 2
– Refill the tank with a different kind of liquor.
1.
pull the liquor tank from the basin cover (the machine will recognize that it
has been removed).
2.
twist the tank caps counter clockwise to remove and clockwise to replace.
3.
fill the tank with your desired liquor, but don’t install tank just yet!
4.
rotate the drink Wheel to the desired liquor then press the center button to
confirm.
5.
because you are selecting a different kind of liquor, the machine will prompt
you to flush out the previous liquor remaining in the basin. Make sure to have a
glass in the cup station to catch the flushed-out liquor. enjoy your shot!
6.
re-install the liquor tank. based on the new liquor selected, the machine will
automatically load corresponding recipes.