H s - 1 2 8 0 u, Analog video recorder – MITSUBISHI ELECTRIC ANALOG VIDEO RECORDER HS-1280U User Manual
Page 2
S P E C I F I C A T I O N S
Standard features, options and specifications subject to change without notice.
©2005 Mitsubishi Digital Electronics America, Inc. Diamond Deck is a trademark of Mitsubishi Digital Electronics America, Inc. All trademarks or registered trademarks are the property of their respective holders.
Printed on 50% recycled paper including 20% post-consumer fibers.
IP5017-03/05-2M-LITHS1280
Mitsubishi Digital Electronics America, Inc.
Imaging Products Division
9351 Jeronimo Road
Irvine, CA 92618
[email protected]
www.mitsubishi-imaging.com
Canada:
Mitsubishi Electric Sales Canada Inc.
Information Technologies Group
Markham, Ontario
905-475-7728
www.MitsubishiElectric.ca
Technical Support:
Toll Free: 888-307-0309
Email: [email protected]
H S - 1 2 8 0 U
Analog Video Recorder
Video
Horizontal Resolution
240 lines in color & 330 lines in B/W
Signal Format
CCIR standard 525 lines 60 fields/sec. NTSC (color/BW) auto select
Tape Format
Standard 1/2" VHS (T120)
Video Recording
2 video helical heads for recording and standard playback,
4 heads for special playback
Luminance Signal
FM recording
Color Signal
Low frequency conversion, sub-carrier phase shift recording
Video Input
1.0 Vp/p, 75 ohms unbalanced, BNC-F jack
Video Output
1.0 Vp/p, 75 ohms unbalanced, BNC-F jack
Signal to Noise Ratio
Better than 42 db (6/8H mode)
Audio
Input
308 mV (rms), 50 K ohms, RCA plug
Output
388 mV (rms), 1 K ohms, RCA plug
Frequency Response
70 Hz to 4 KHz (6/8H mode)
Signal to Noise Ratio
Better than 43 db (6/6H mode)
Connectors
ALRM Input
Screw terminal, input to start alarm recording
RST Input
Screw terminal, input to end alarm recording and for adjusting
multiple VCR clock settings
Record Input
Screw terminal, input used for independent start/stop recording and
for series recording
GND
Screw terminal for chassis ground
Alarm Output
Screw terminal, output to alarm device (siren, horn, other) while alarm
is active
CLCK Output
Screw terminal, output clock signal for camera switching
MODE Out
Screw terminal, output signal indicates VCR’s operations mode
(Rec/Play/Power/others)
CALL Out
Screw terminal, output warning signal and also used in series
recording (alarm, other & malfunction)
Recording Speed and Modes (T120 & T160)
Mode
Time
Mode
Time
Speed
Intervals
Fields
Audio
Tape Drive
2H Play only
2H Play only
6H
6H
8H
8H
11.12 mm/sec
16.68 ms/field
60
Yes
Continues
L18H
18H
L24H
24H
3.71 mm/sec
50.04 ms/field
20
Yes
Continues (slow)
L30H
30H
L40H
40H
2.22 mm/sec
83.40 ms/field
12
Yes
Continues (slow)
48H
54H
64H
72H
-
150.1 ms/field
6.7
No
Time-lapse
72H
78H
96H
104H
-
216.8 ms/field
4.6
No
Time-lapse
96H
102H
128H
136H
-
283.6 ms/field
3.5
No
Time-lapse
120H
126H
160H
168H
-
350.3 ms/field
2.9
No
Time-lapse
168H
174H
224H
232H
-
483.7 ms/field
2.1
No
Time-lapse
240H
246H
320H
328H
-
683.9 ms/field
1.5
No
Time-lapse
360H
366H
480H
488H
-
1.017 s/field
0.98
No
Time-lapse
480H
486H
640H
648H
-
1.051 s/field
0.74
No
Time-lapse
720H
726H
960H
968H
-
2.018 s/field
0.5
No
Time-lapse
960H
966H
1280H
1288H
-
2.685 s/field
0.37
No
Time-lapse
General
Audio Tracks
1 track (audio in 6/8/L18/L24/L30/L40 modes)
Battery Backup
31 days
Fast Forward/Rewind Time
Approx. 160 sec. with T-160
Elapsed Use Time
To 89,999 hours maximum
Timer Programs
8 position, daily start and stop times for one week
Alarm Recording Time
Timed: 15/30/45 sec. 1/2/5/10 min.
Setup Menu
On screen
Motors
3 motors - drum/capstan/loading
Heads-Video
4 rotary heads
Heads-Audio/Control
1 stationary audio & control head
Head-Erase
1 full track erase head
Rating: SET/RST/REC
Active when shorted to ground or “L” (0-+1.6 V), time to activate
0.1 sec. or more. *Inactive when open
Rating: ALARM/CALL/MODE
Active “L” (0-.4 V) output max. drive current 50 mA (+5 V DC)/
10 mA (24 V DC). *Inactive open
Rating: CLK Recording
A pulse of freq. div. ratio, selected by REAR TERMINAL menu
Power Source
100-230 VAC 50/60Hz
Power Consumption
Approx. 18 watts
Power Cord
3 wire (3 prong for 120V/60Hz )
Operating Temperature
41°F - 104°F (5°C - 40°C)
Relative Humidity
Max. 80%
Dimensions
16.7 x 3.7 x 12.3 in.
(W x H x D) (including jog dial)
(425 x 95 x 313 mm)
Weight
9 lbs. (4.2 kg)
Input And Output Terminal
Picture Perfect Security Frame After Frame