Melissa 646-063 User Manual

Page 14

Advertising
background image

INTRODUCTION

To get the best out of your new hand blender,
please read this user guide carefully before using
it for the first time. We also recommend that you
keep the guide for future reference.

SAFETY MEASURES

Normal use

Incorrect use of your blender may cause
personal injury and damage to the appliance.

Use for its intended purpose only. The
manufacturer is not responsible for any
damage resulting from incorrect use or
handling (see also Guarantee Terms).

The blender may only be connected to 230 V,
50 Hz.

The blender motor and mains cable must not
be immersed in water or other liquid, nor
rinsed under a tap.

Always disconnect from the mains when not
in use, if left unattended, whilst fitting or
removing accessories and before cleaning.

Allow the blender to cool before removing
accessories and/or cleaning.

Never use any other accessories than those
recommended by the manufacturer as fire,
electric shock or other personal injury may
result.

Never leave the blender unattended when in
use. Keep an eye on children when using the
blender.

Keep fingers well away from the rotating
blades as they can cause serious injury. Never
put fingers or kitchen implements into the jug
when the blender is running.

Take great care when cleaning and handling
the blades as they are very sharp.

This blender is not suitable for commercial or
outdoor use.

Placing the blender

Do not allow the cord to hang over the edge
of a table/counter, and keep it away from hot
objects and naked flames.

Place the jug and mini chopper on a flat level
surface during use.

Cord, plug and mains socket

Check regularly that the cord is not damaged
and do not use the appliance if it is, or if it has
been dropped or damaged in any other way.

If the blender, cable or plug are damaged, the
appliance must be inspected and if necessary
repaired by an authorised repair engineer,
otherwise there is a risk of electric shock.
Never try to repair the appliance yourself.

Remove the plug from the socket for
cleaning.

Avoid pulling the cord when removing the
plug from the socket. Instead, hold the plug.

Check that it is not possible to pull or trip over
the cord or any extension cable.

KEY TO MAIN COMPONENTS

1. Speed selection buttons

2. Motor unit

3. Removable blender shaft

4. Blades

5.

Blender jug

14

UK

5.

2.

1.

4.

3.

IM_646063 01/11/07 11:18 Side 14

Advertising