Mustek 1200 - Manual (Page 9)

6
Using the Scanner Buttons
on the Control Panel
Make sure that the Direct Scan is enabled
(shown) on your Windows® taskbar in order for
the scanner buttons to work. If in case Direct
Scan is disabled and user wants to enable it,
perform the following:
1. Click on Start on your Windows® taskbar.
2. Click on Programs and select your Scanner
Model.
3. Click on Direct Scan.
Scanner Hardware Buttons Settings
Upon right-clicking the Direct Scan icon located
on your Windows® taskbar, the following menu
appears:
Click on Scanner Settings and the following
appears allowing you to make changes to your
scanner’s control panel buttons’ settings.