Makita 2001 HSC - Manual

POWER TOOL ACCESSORIES
BENCH GRINDERS & DRILL PRESSES
6” BENCH GRINDER WITH LIGHTS
• Two grinding wheels (1-coarse and 1-medium)
• 1/2 HP, 120 volt, 1 phase, 60 cycle motor
• Two independently adjustable lights; Two eye shields;
Two 15-watt light bulbs; Two spark guards
• CSA & UL approved
8” BENCH GRINDER WITH LIGHTS
• Wheel sizes 8” x 3/4”, bore 5/8”
• 1 HP, 120 volt, 1 phase, 60 cycle motor
CUT-OFF AND CHOP SAWS
ATD 14” ELECTRIC CUT-OFF SAW
• 15A, 120V, 60 Hz, 2000W
• Blade inner bore size: 1”
• Disk: 14” x 1/8” x 1”
• With safety switch
5 SPEED BENCH DRILL PRESS
• 1700 RPM • 2.5 amp
• 1/2” chuck size • UL Approved
16 SPEED DRILL PRESS WITH
LASER CENTERING DEVICE
• 1/4 HP motor • 2.5 amp
• 5/8” chuck size • UL approved
DEWALT 14” CHOP SAW
• 15.0 amps (3.2 hp)
‡ ÛWRROIUHHSLYRWLQJIHQFHDOORZVIRUIDVW DFFXUDWHDQJOHFXWV
• Wide steel base for increased stability / bolt down to work bench
• Adjustable spark guard MAKITA 14” ELECTRIC
CUT-OFF SAW
• 3,800 RPM, 15 amps
• Adjustable depth stop for precise, repeatable cutting depth
• Lock-off button helps prevents accidental starting
•
FREE MKT-9557PB 7.5-AMP 4-1/2" GRINDER
6” BENCH GRINDER WITH WORK LIGHTS
• Direct drive 1/2 HP ball bearing induction motor, 3450 rpm
• (2) Flexible 15W work lights, (2) 6” grinding wheels (medium and coarse)
• 1/2” Arbor accommodates 6” wheel with up to 3/4” maximum width
• Adjustable, shatter-resistant eye shields, metal tool rests and spark guards
• Base has pre-cast holes for mounting onto workbench or stand
• Removable wheel guards for mounting of optional wheels
• 5-1/2 ft. power cord
• 120V, CSA & UL Approved • Weight 26 lbs.
8” BENCH GRINDER WITH WORK LIGHTS
• Direct drive 3/8 HP ball bearing induction motor, 3450 rpm
• 5/8” Arbor accommodates 8” wheel with up to 1” maximum width
BENCH GRINDER STAND
• Designed for use with ATD-10546
and ATD-10548 bench grinders as
well as most other bench grinders.
• Multi-slotted table
IRUPRXQWLQJÀH[LELOLW\
• Built-in cooling tray.
‡ +HDY\SUHGULOOHGEDVHIRUÀRRUPRXQWLQJ
• 30”
tall.
MKT-ML120
6” HEAVY-DUTY BENCH GRINDER
• Powerful 5/8 HP induction motor for heavy-duty grinding
• Motor runs at 3,450 rpm for high speed material removal
• Cast-iron base and motor housing
• Precision-machined adjustable aluminum tool rests
allow the user to accurately position work
• AMPS (120V AC): 4.0
• Spindle diameter: 1/2”
8” HEAVY-DUTY BENCH GRINDER
• 3/4 HP induction motor provides superior power for
industrial grinding applications
• Spindle diameter: 5/8”
LASER
CENTERING
DEVICE!
Quality tools, precision
engineered for performance
and reliability at the factory,
shop or farm.
FREE!
MKT-9557PB
7.5-Amp 4-1/2" Grinder
RETAIL VALUE: $142.00
4-1/2” ANGLE GRINDER
• 6.25 amp • 120 Volt 60 Hz 720 watt
• No load speed: 11,000 rpm
• Disk diameter: 4 1/2”
• Spindle thread: 5/8” - 11”
• With side handle
• Wheel Not Included
• Weight: 5.5 lbs.
6.0 AMP 4-1/2” GRINDER WITH FREE GRINDING WHEELS
• Small circumference barrel grip (only 2.5”) for added comfort
• 6.0 AMP motor for high output power in a compact tool (only 3.1 lbs.)
• All ball bearing design and metal gear housing for durability
• Rotatable gear housing rotates 90° for cutting applications
• Standard Equipment: 4-1/2’’ Grinding Wheel; Wheel Guard;
Lock Nut; Lock Nut Wrench; Side Handle; Inner Flange
HEAVY-DUTY 4-1/2” 18-VOLT
CORDLESS CUT-OFF TOOL
• Convenient trigger switch with lock-off button for easier gripping
• 3 Position side handle offers greater comfort and control
6SHFL¿FDWLRQV
Voltage 18 V
No Load Speed 6,500 rpm
Spindle Lock Yes
Spindle Thread 5/8” -11”
Tool Weight 7.0 lbs
Use Wheels RPM Above 10,000 rpm
ANGLE GRINDERS
HEAVY DUTY 4-1/2” SMALL ANGLE GRINDER
‡ /RZSUR¿OHMDPSRWJHDUFDVHLQFUHDVHVGXUDELOLW\DQGDOORZVWRROWR¿WLQWRWLJKWVSDFHV
• Oversized, protected spindle lock button provides easier and quicker wheel changes
• 5/8”-11 spindle thread accepts a wide range of 4-1/2” accessories.
6SHFL¿FDWLRQV
Amps: 7.0 Amps
Max Watts Out: 800 W
No Load Speed 11,000 rpm
Use Wheels RPM Above 12,000 rpm
Spindle Lock: Yes
Spindle Thread: 5/8”-11
Tool Length: 10-3/4 “
Tool Weight: 4.10 lbs.
10 AMP HEAVY DUTY 4-1/2” SMALL ANGLE GRINDER
• Dust Ejection System™ ejects dust particles that enter the tool through the air intake vents
‡ -DPSRWORZSUR¿OHJHDUFDVHSURYLGHVSUHFLVHJHDUDOLJQPHQWIRUDVPRRWKHUTXLHWHUWUDQVPLVVLRQ
• Quick-Change wheel release provides easier and quicker wheel removal without the need for a wrench
6SHFL¿FDWLRQV
Amps: 10.0 Amps
Max Watts Out: 1,200 W
No Load Speed 11,000 rpm
Use Wheels RPM Above 12,000 rpm
Spindle Lock: Yes
Spindle Thread: 5/8”-11”
Tool Length: 11-1/4
Tool Weight: 4.6 lbs.
FREE!
4 GRINDING WHEELS
Retails Value:$11.65
MKT-ML123
IRC-2528K
DWT-DC527
CLA-BT1029
CLA-BT1023
MKT-632002-4-10
MKT-723066A-5
ATD-10541
HEAVY-DUTY 14” CHOP SAW
W/ QUICK-CHANGE
KEYLESS BLADE CHANGE SYSTEME
• Powerful 15.0 Amp/5.5 HP (maximum motor HP) motor
• Quick-Change Blade Change System increases productivity by providing
the user the ability to change wheels without a wrench
• Large cutting capacity (5" round / 4-1/2" x 6-1/2" rectangle)
HEAVY-DUTY 18V CORDLESS
1/2 GALLON WET/DRY PORTABLE VAC
• Dual Clean-up Modes allow for debris clean up with either the
Front Utility Nozzle or Extendable Rubber Hose
• 1/2 Gallon Tank with Heavy Duty Latch is easy to empty and clean
‡ *RUHŒ+(3$:HW'U\¿OWHUWUDSV  RIGXVWDWPLFURQV
‡ :DVKDEOH¿OWHUWDSRUZDWHUULQVHWRFOHDQ
‡ +HDY\GXW\UXEEHUKRVHSURYLGHVGXUDELOLW\DQGÀH[LELOLW\
• Large On/Off Switch that is easy to access with one hand
• Runs off of 18V DEWALT battery packs for longer runtime
MKT-741423-0
12” METAL CUTTING SAW
• Powerful 15 AMP motor
• D-shape handle for easy gripping
• Long lasting carbide tipped blade, virtually burr free
• Lock-off button prevents accidental starting
• "Tool-less" guide plate adjusts 0 - 45° for quick and easy miter cutting
• Quick release vise for secure stock retention and fast repeated cut-offs
• Socket wrench stores on base for convenient blade changes
• Shaft lock for easy blade changes with just one wrench
• Shavings collection tray for easy waste disposal and a cleaner work environment
• Maximum cutting depth of 4-1/2" with carbide tipped blade
14
ATD-10548 . . . . . . . . . . . . . . . . $69.95
ATD-10547 . . . . . . . . . . . . . . . . $49.95
ATD-10546 . . . . . . . . $59.95
ATD-10514 . . . . . . . . . $139.95
DWT-D28700 . . . . . . . . . . $211.35
DWT-D28715 . . . . . . . . . . . . . . $259.00
MKT-2414NBX2 . . . . . . . . . . . $224.95
MKT-A938595 . . . . . . . . . . . . . . $18.26
• 14 Inch Cut-Off Wheels - 5 Pack
CLA-BT1006 . . . . . . . . . . . . . . . $89.95
CLA-BT1005A . . . . . . . . . . . . . . $63.75
CLA-BT1023 . . . . . .$106.95
CLA-BT1029 . . . . . .$299.00
CORDLESS RECHARGEABLE FLASHLIGHTS
DWT-DC527 18V Fluorescent Work Light $54.75
MKT-ML123 12V Fluorescent Automotive Light $52.95
MKT-ML143 14.4V Fluorescent Automotive Light $55.65
MKT-ML183 18V Fluorescent Automotive Light $58.25
MKT-ML702 7.2V Rechargeable Flashlight $32.85
MKT-ML903 9.6V Rechargeable Flashlight $38.95
MKT-ML120 12V Rechargeable Flashlight $39.95
MKT-ML140 14.4V Rechargeable Flashlight $48.75
MKT-ML180 18V Rechargeable Flashlight $45.90
IRC-2528K 14.4V Cordless Task Light $59.95
IRC-2529K 19.2V Cordless Task Light $59.95
RECHARGEABLE FLASHLIGHT BULBS
DWT-DC5273 12V - 18V Fluorescent Bulb $10.50
DWT-DW756 . . . . . . . . . . . . . . $105.25
DWT-DW758 . . . . . . . . . . . . . . $149.95
MKT-9554NBX . . . . . . . . . . . . . $79.95
MKT-741423-0 . . . . . . . . . . . . . . . . . . . . . $24.15
• 4-1/2” Grinder Wheel 24G - 5 Pack
ATD-10501 . . . . . . . . . . . . . . . . $41.95
DWT-DC410KA . . . . . . . . . . . . $282.00
DWT-D28110 . . . . . . . . . . . . . . . $76.95 DWT-D28402 . . . . . . . . . . . . . . $119.95
CUTTING TOOL BLADES AND WHEELS
MKT-723066A-5 5/pk 6” 18-TPI Recip Blade $11.04
MKT-741423-0 5/pk 4-1/2” 24-Grit Grinding Wheel $24.15
MKT-A938595 5/pk 14” Cut-Off Wheel $18.26
DWT-DW4514 -- 4-1/2” 24-Grit Grinding Wheel $2.49
BENCH GRINDER GRINDING WHEELS
ATD-10541 -- 6” 80-Grit Grinding Wheel $3.79
ATD-10542 -- 6” 60-Grit Grinding Wheel $3.79
ATD-10543 -- 8” 80-Grit Grinding Wheel $6.29
ATD-10544 - 8” 60-Grit Grinding Wheel $6.29
BATTERIES AND CHARGERS
DWT-DW9116 1 Hour NICD Charger W/Tune-Up Mode $79.81
DWT-DW9061 9/6V XR Battery PACK $59.95
DWT-DC9071 12V XRP Battery $89.25
DWT-DC9091 14.4V XRP Battery $86.95
DWT-DC9096 18V Battery XRP $109.50
MKT-632002-4-10 7.2V Rechargeable Stick Battery $42.60
MKT-632007-4-10 9.6V Rechargeable Stick Battery $49.95
MKT-194172-2 14.4V 1.3 Amp NiCad Pod Style Battery $46.30
MKT-193157-5 12V 2.6 Amp NIMH Pod Style Battery $91.25
MKT-194157-8 14.4V 2.6 Amp NIMH Pod Style Battery (Double Pack) $105.60
MKT-DC1804 18V Charger for 193159-1 $66.75
DWT-DC515K . . . . . . . . . . . . . $151.50
MKT-LC1230 . . . . . . . . . . . . . . $499.00