Macally PHR-250CE - Manual (Page 5)

Introducing IEEE1394A FireWire/Hi-Speed USB2.0
2.5" Hard Drive Data Encrypt Enclosure-PHR-250CE
Thank you for using the PHR-250CE-Portable IEEE1394A FireWire/Hi-
Speed USB2.0 2.5" Hard Drive Enclosure. This is a portable size enclosure
which support 2.5” IDE Hard drive. It is simple to install and comes with all
the parts you need to create an external IEEE1394A FireWire/ Hi-Speed
USB2.0 device.
About This Guide
Before you begin using the PHR-250CE, be sure to read this manual in its
entirety.
This guide contains:
•
Introducing IEEE1394 FireWire/Hi-Speed USB2.0
2.5" Hard Drive Data Encrypt Enclosure
• Hardware Installation
• Software Installation
System Requirements
For Mac
• G3, G4, iMac, G3 PowerBook, iBook or G4 PowerBook models
with USB or FireWire port ready
• MacOS 9.2, FireWire support 2.4 and up, and/or USB
support 1.4.1 and up for USB1.1 Speed
• MacOS X for USB2.0 Hi-Speed (USB2.0 Host adapter required)
For PC
• Pentium II or compatible Desktop or Notebook with USB or IEEE
1394 FireWire port ready.
• Windows98 SE, Windows2000, WindowsME or WindowsXP
• USB2.0 host adapter is required for Hi-Speed USB2.0 transfer speed
Using AC/DC Adapter (optional)
Basically, if you connect the PHR-250CC direct into built-in FireWire or
USB port (USB power cable is also needed), AC/DC adapter is not
required. However
(1) if USB connection dose not response or
(2) the PHR-250CC Enclosure is connected to a CardBus to
FireWire adapter, or 4-pin iLink Firewire port
AC/DC adapter is required.
5