Macrom 3.5 - Manual (Page 7)

7
To fix the suction support, place the sucker on the
windscreen and press the lever, making sure that
the seal is secure.
Then insert the navigator into the support.
To connect the charger, insert the terminal (1)
into the connector on the navigator and terminal
(2) into the car’s cigar lighter socket.
Note
While in use, the car charger functions as a supply
for the navigator and as a battery charger.
Recharging is quicker when the navigator is turned
off.
CAUTION: to protect the navigator from voltage
surges, we recommend you connect the car
charger only after starting the engine.
MEMORY CARDS
In the top panel of the navigator you will find a
slot into which you can insert SD (Secure Digital)
memory cards.
The navigator is supplied with an SD card
containing navigation software and maps already
installed and activated.
Remember that the SD card must be inserted in
the slot in order for the navigator to work and
must not be removed during use.
IMPORTANT: The memory card must be inserted in the slot with the label facing towards the
rear of the navigator.
If it is necessary to remove the card, close all applications and turn off the navigator, then
remove it from the socket by pressing lightly on the edge.