Installation instructions, Laundry tower use, Laundry tower care – Maytag W10101295A User Manual

Page 3: Warning, Install the laundry tower

Advertising
background image

3

INSTALLATION INSTRUCTIONS

Install the Laundry Tower

1. Using two or more people, situate the laundry tower near its

final location. Open the drawers to remove any contents
stored inside.

2. To determine how far to extend the leveling feet, measure the

height of the washer and/or dryer you are installing the
laundry tower next to or between.

NOTE: Refer to the laundry tower dimensions in “Location
Requirements.”

3. Place a piece of cardboard on the floor and, using two or

more people, lay the laundry tower on its side.

4. Turn all four feet out to the dimension determined in Step 2.

5. Using two or more people, return the laundry tower to the

upright position.

6. Check the laundry tower height and levelness and adjust the

feet as needed.

7. Once the laundry tower is at the appropriate height and is

level, use a

⁹⁄₁₆" (14 mm) open-end wrench to securely tighten

all four locknuts against the laundry tower.

8. Using two or more people, slide the laundry tower into its final

location and confirm height and levelness.

LAUNDRY TOWER USE

Your laundry tower has several uses.

The top drawer provides storage and organization for small
items.

The bottom drawers provide convenient storage space for
large items such as detergent bottles.

The retractable hanging rod may be used to hang several
items of clothing. To open or close the hanging rod, push it in
until you hear it click.

LAUNDRY TOWER CARE

To clean the interior and exterior:

Use a soft damp cloth or sponge to wipe up any spills.
Occasionally wipe the surfaces of your laundry tower to help
keep it looking new.

Use mild soap and water; do not use abrasive products.

A. Locknut

WARNING

Excessive Weight Hazard

Use two or more people to move and install
laundry tower.

Failure to do so can result in back or other injury.

A

Advertising