Meco 6212S00T91 User Manual
Page 10
10
Step 7 (Model 6212)
Wheel Assembly
Place the Tank Support between the Left Legs so the holes in
the end align with the holes in the legs with the flanges facing
up. The flanges have notches with different spacing; the side
with the notches closer together should be to the inside of the
cart.
Insert an Axle through the Wheel, the leg tube and the Tank
Support end. Fasten in place by inserting an Axle Pin through
the small hole near the end of the Axle.
Axle Pin
Axle
Narrow notch
spacing to inside
Tank Support
Axle Pin
Axle (not shown to scale)
2 pc
Axle Pin
2 pc
Step 7 (Model 6512)
Wheel Assembly
Insert an Axle through the Wheel and the leg tube. Fasten
in place by inserting an Axle Pin through the small hole near
the end of the Axle.
Place the Tank Support between the Left Legs so the holes
in the ends align with the holes in the legs above the axle
holes. Orient with the flanges facing up. The flanges have
notches with different spacing; the side with the notches
closer together should be to the inside of the cart. Fasten the
ends to the legs with two 1/4-20 x .39” Bolts.
1/4-20 x .39” Bolt
2 pcs
Axle Pin
Axle
Tank Support
1/4-20 x .39” Bolt