Motorola RSVP Numeric Display Pager for Micro-TAC Cell Phones - Manual (Page 7)

7
CHANGING ALERT MODES
1. Press X . Either “Silent?” or “Audio?” is displayed,
depending on the current mode.
2 . To change the alert mode, press W .
For your pager to vibrate, it must be in the “silent” mode.
TURNING YOUR PAGER OFF
1. Press X until the “PAGER OFF?” prompt is displayed.
2. Press W to turn the pager off.
With the pager off, the clock is shown on the display, but not
the “Alert Mode” indicator.
SETTING THE ALARM
Your pager’s alarm can be set to alert you to a certain time of
day. Set the alarm as follows:
1. Press X until “SET ALARM?” appears on your display.
2. Press W to select alarm on/off sequence.
3. To move to the next digit, press W . To advance through
each digit, press X . Repeat this process for each field
(On/Off, hours, minutes, AM/PM).
4. Press W to turn the alarm on or off.
5. Press the ● button twice to return to the main display
menu.
The \ indicator appears on the display when the alarm is
turned on. At the selected time, the alarm vibrates or emits a
unique 20-second alert and “ALARM” is displayed.
1. Press any button to stop the alarm alert.
SETTING THE TIME
Set the displayed time as follows:
1. Press X until “SET TIME?” is displayed. Then press W
once.
2. Press X until desired hour appears.
3. Press W to move to the next digit.
4. Repeat process for each field (hours, minutes, AM/PM).
5. Press the ● button twice to return to the main display
menu.