MGE UPS Systems EXB10 - Manual (Page 7)

MGE UPS SYSTEMS Pulsar EX : 51032233XT/AC v
options
c rack installation kit: this kit is used to
install Pulsar EX7, EX10 and EX15 in a 19-
inch rack. The kit is designed to receive two
Pulsar EX7, EX10 and EX15, or one Pulsar
EX10/EX15 and a battery extension unit,
thus offering up to 3000 VA of power;
c UM Sensor environment measurement
unit: compatible with SNMP and UPS
Manager 2 Unix and OS/2, or Solution
Pac
TM , this unit measures the temperature
and the relative humidity in the room where
the Pulsar is installed. Eight relay contacts
are provided to transmit signals to an
administration platform, in the form of
voltage free contacts to enable monitoring of
(fire alarm, climate control fault, intrusion,
etc.);
c battery extension module: Pulsar
EXB10/EXB15 battery extension modules
lengthen the battery time of the Pulsar
EX10/EX15 to meet your requirements.
additional communications
options:
c communication cables: these cables are
used for the file-closing utilities offered by a
number of network operating systems. They
are available for Novell NetWare, Microsoft
Lan Manager and Windows NT, IBM Lan
Server, Artisoft LANtastic, Banyan Vines,
Apple System 7, IBM AS400 and many
others;
c UPS Manager 2 communication
software: this software can be used for
automatic file closing on one or more
servers, as well as for remote UPS
shutdown and interrogation of all Pulsar
EX7, EX10 and EX15 operating parameters.
It is available for Novell NetWare, Microsoft
Lan Manager, IBM Lan Server, the main
Unix systems on the market (SCO, AIX, HP/
UX, OSF 1, etc.) VAX UMS and many
others;
c SNMP administration: MGE UPS
SYSTEMS has the most complete offering
for the administration of a group of UPSs
using the SNMP protocol with different
network-connection modules (UM Link
adaptor or proxy UM Agent software),
supervision modules (dedicated software
under Windows UM View or application for
NMS platforms such as HP OpenView or
Novell NMS) and a file-closing module (UM
Client). The MGE UPS SYSTEMS offering
complies with RFC 1628 specifications
(IETF) and was certified by the InterWorking
Labs during the Test Summit in June 1994;
c SNMP card: this card, inserted into your
unit, makes your UPS SNMP-compatible in
any environment;
c status information card: this option
provides you with 5 voltage free contacts: on
battery, on by-pass, low battery, load on
UPS.
Contact your dealer for further information
on these options.