MGE UPS Systems EXB10 - Manual (Page 16)

16 Pulsar EX: E-51032233XT/AC MGE UPS SYSTEMS
operation on battery
no utility power
1a to 1d indicating the battery
recharge percentage: here,
between 12 and 25%
1e indifferent
1f on
silence
your load is supplied by the utility power
(on line)
1a to 1d indicating the load charge
percentage: here 50%
1e off
1f on
silence
At whatever point the utility power
returns, Pulsar switches to normal
operation:
return of utility power load charge percentage
Note:
The alarm silence button is to deactivate or
activate the audio warning device when
operating on battery, or when site wiring
fault occured.
If utility power is present, hold alarm
silence button in:
x +
ε
mn x mn 5 mn 0 mn
to
if Pulsar is operating on battery
without load: UPS switches off Pulsar switches off
automatically warning alarm at low
battery
indicating the
remaining battery
time: here, between
75 and 87% to
silence
1a 1c 1a 1f 1a 1f
silence
flashing 1d
1f
1a 1d
1e
1f
flashing 1e
load off
1 beep every 10 s
your load is supported
by the battery
to off
you have less than 12% battery
time remaining: power down
your load, Pulsar will soon
switch off automatically UPS output "off"
to off off
1 beep every 3 s
break in utility power
on
flashing
on