Morphy Richards Boxer wet & dry vacuum cleaner - Manual (Page 4)

Assembly
1 Release the tank latches › and lift off
the upper body ¤ . B
2 Remove any components stored inside
the tank, please see page 3 for the list of
accessories you should have.
3 Turn the tank upside down.
4 Press the castors
fi into the four holes
provided. Do not use excess force. C
5 Refit the upper body ¤ and slide the
latches › back into position.
6 Push the hose end ‚ firmly into the
tank A.
7 Fit one of the extension tubes  into the
other end of the hose. If required a
second extension tube can now be
added and the nozzle fitted into the
end.
A
Nozzle Ê - Recommended for carpets
Brush insert Á - Recommended for hard
floors.
Squeegee insert
Ë - Recommended for
wet pick up.
8 Fit the outlet elbow Í into the outlet ·
on the upper body. D The outlet elbow
can be used to direct the exhaust air.
(The exhaust air must be directed
away from people).
4
B
D C
Usage type
Wet pick-up
(large volumes of
liquids, floods, spills,
blocked drains).
Dry pick-up
(Household use,
wood chips, sawdust,
soil, sanding debris).
Wet and dry pick-up
(Combination of both
but not large volumes
of liquid).
Cartridge filter Î Foam Filter Ï Paper bag Ô Comments
Never use the paper
bag for wet pick-up.
The paper bag is
recommended for
extra hygiene and
convenient disposal
of fine dust. The
foam filter can be
used in conjunction
with the paper bag
but should never be
used alone for dry
pick-up.
Always use the
cartridge filter for
combination pick-up.
Filtration