Preparating your projector (continued), En-8 1 2, Bottom side – MITSUBISHI ELECTRIC WD2000 User Manual

Page 8: Remote control, About the laser beam

Advertising
background image

EN-8

1

2

Preparating your projector (continued)

Bottom side

1 Lamp

cover

2 Adjustment

feet

Caution:
Do not replace the lamp immediately after using the
projector because the lamp would be extremely hot
and it may cause burns.

Remote control

1 Laser

aperture

2 Transmission

window

3 Wired remote control jack
4 Indicator
5 POWER

button

6 VIDEO

button

7 DVI-D(HDCP)

button

8 HOME

button

9 END

button

10 Mouse pointer
11 LENS SHIFT button
12 MENU button
13 ZOOM/FOCUS button
14 + , - (VOLUME) buttons
15 COLOR ENHANCER (CE) button
16 MUTE button (Audio/Video)
17 STILL button
18 ASPECT button
19 KEYSTONE button
20 ENTER button
21 R-CLICK button
22 Direction buttons
23 LASER button
24 AUTO POSITION button
25 Page Up and Page Down buttons
26 S-VIDEO button
27 COMPUTER 1, 2 buttons
28 Left click button

• The + and - buttons are used in the KEYSTONE adjustment in addition to the volume control.
• The direction buttons are also used for keystone and lens shift adjustments. The and buttons are also used

for zoom/focus adjustment.

• Pressing the LASER button emits a laser beam. Even when you keep holding down the LASER button, it is emitted

only one minute. To keep emitting it longer, press the LASER button again.

• You can disable the LASER button to prevent laser radiation due to misuse of the button.

How to disable the LASER button

While holding the LASER button down, press the

button 3 times.

How to enable the LASER button

While holding the LASER button down, press the

button 3 times.

• Whenever the batteries are replaced, the LASER button is enabled.

About the laser beam

This remote control is a Class 2 laser product. (Max. output : 1 mW, Wavelength : 620-640 nm)
Beam Divergence : 6 m distance about 10.0 mm x 10.0 mm (±6.0 mm)

CAUTION:
• Pressing the LASER button on the remote control emits a laser beam. Do not look into the laser beam directly. Do

not point the laser beam at anyone. Looking at the laser beam directly may damage eyesight.

• Use of controls or adjustments or procedures other than those specifi ed herein may result in hazardous radiation exposure.
• This remote controller cannot be repaired.

28

COMPUTER

VIDEO

S-VIDEO

DVI-D(HDCP)

HOME

Page Up

END

Page Down

AUTO POSITION

KEYSTONE

ASPECT

STILL

MUTE

LENS SHIFT

ZOOM / FOCUS

1

2

VOLUME

27
26
25
24

23

22

21
20
19
18

17

16

CE

MENU

ENTER

LASER

R-CLICK

1

3

4

5

6
7
8
9

10

11

12
13
14

15

2

Advertising