Moxa Technologies EM-1240-LX - Manual (Page 57)

B B
Appendix B
SNMP Agent with MIB II & RS-232 Like
Group
The EM-1240-LX has a built-in SNMP (Simple Network Management Protocol) agent that
supports RFC1317 RS-232 like group and RFC 1213 MIB-II. The following table lists the variable
implementation for the EM-1240-LX.
The full SNMP object ID of the EM-1240-LX is “.iso.3.6.1.4.1.8691.12.7112” and
“.iso.3.6.1.4.1.8691.12.1240”.
Note: The EM-1240-LX does not support SNMP trap.
RFC1213 MIB-II supported SNMP variables:
system MIB interface MIB at MIB icmp MIB
sysDescr
sysObjectID
sysUpTime
sysContact
sysName
sysLocation
sysServices ifNumber
ifTable
ifIndex
ifDescr
ifType
ifMtu
ifSpeed
ifPhysAddress
ifAdminStatus
ifOperStatus
ifLastChange
ifInOctets
ifInUcastPkts
ifInNUcastPkts
ifInDiscards
ifInErrors
ifInUnknownProtos
ifOutOctets
ifOutUcastPkts
ifOutNUcastPkts
ifOutDiscards
ifOutErrors
ifOutQLen
ifSpecific atTable
atIfIndex
atPhysAddress
atNetAddress icmpInMsgs
icmpInErrors
icmpInDestUnreachs
icmpInTimeExcds
icmpInParmProbs
icmpInSrcQuenchs
icmpInRedirects
icmpInEchos
icmpInEchoReps
icmpInTimestamps
icmpInAddrMasks
icmpInAddrMaskReps
icmpOutMsgs
icmpOutErrors
icmpOutDestUnreachs
icmpOutTimeExcds
icmpOutParmProbs
icmpOutSrcQuenchs
icmpOutRedirects
icmpOutEchos
icmpOutEchoReps
icmpOutTimestamps
icmpOutAddrMasks
icmpOutAddrmaskReps