Siemens Xelibri 7 - Manual (Page 4)

Getting Started
3
right page (3) of EMMA e2, A31008-H9260-A45-2-7619 (26.09.2003, 09:29)
© Siemens AG 2003, P:\PN\ISDN\XELIB
RI Ve
rs. 2\UGS\EMMA\e2\emma_getting_started.fm
VAR Language: ENG; VAR issu
e date: 18-September-2003
Getting
Started Fitting battery
Open SIM cover, using thumbnail to extract one end first
(1). Press the button at the rear of your Xelibri (2) whilst
sliding the battery cover towards the bottom of your
Xelibri (3).
Engage the battery tabs in the slots (4), then swing into
place (5). Refit the battery cover.
To remove battery, lift tab at the bottom.
Fitting SIM card
Your service provider supplies your SIM card. If it’s credit
card size, snap out the smaller portion and tidy any
rough edges.
Flip down SIM cover, see Fitting battery. Fit the SIM in
the top slot, positioning the cut-off corner as shown.
Press until it clicks into place. The SIM is spring-loaded –
to remove, press it in.
Charging
Insert the supplied charger into an easily accessible
mains socket of the correct rating and, flipping open the
SIM cover, plug into the bottom socket with the pins face
up.
While it charges, the battery indicator will animate – if it
doesn’t, then see What if...? on p 22. Allow 2-3 hours
for a full charge. Be sure to unplug the charger from the
mains when you’re finished.
2
3 1
5
4
emma.book Seite 3 Freitag, 26. September 2003 9:46 09