Mattel B-Smart - Manual (Page 8)

3 4
Mouse Connection
1. Ensure the unit is turned off.
2. Open the panel on the right hand side of the unit and plug the mouse into the mouse jack.
3. Turn the unit ON.
4. To ensure the mouse is kept clean, use it on a clean mouse pad.
Starting the B-Smart™ Learning Laptop
Open the unit by pushing on the jewel situated on the laptop cover. The lid will spring open and
the unit will turn on automatically.
Alternatively, if the unit is already open, turn on the B-Smart™ Learning Laptop using the
button located on the top right hand corner of the keyboard. At the end of a session, remember to
turn off the power by pressing the same button.
Auto-off
If there is no input on the unit after five minutes, the unit says “Catch you later” and
automatically turns itself off to conserve power. To start playing again, just press the button
to turn the unit back on.
Storage & Care
To ensure that the product enjoys a long life, please follow these simple rules:
Regularly examine the unit for damage to the cord, plug, enclosure and other parts. In the event of such
damage, the unit must not be used with the adaptor until the damage has been repaired. Always disconnect
the power supply before cleaning. Keep the unit clean by wiping the exterior of the unit with a dry cloth.
Avoid getting the unit wet. The unit should not be dismantled. Always store the unit away from direct
sunlight and high temperatures. Avoid leaving the unit in a car where it is exposed to direct sunlight.
The unit should not be subjected to extreme force or shock.