Getting started, Insert sim card/battery – Siemens C62 User Manual

Page 7

Advertising
background image

Getting started

6

C62 en SUG, A31008-H6880-A1-2-7619 (15. December 2003, 14:46)

©

Siem

ens AG 2002

, I

:\Mob

il\L55\C

62_Z

w

ei

tau

sgabe\en\_v

on_i

tl\C62_

Startup.fm

Getting
started

Insert SIM card/battery

The service provider supplies you

with a SIM card on which all the im-

portant data for your account is

stored. If the SIM card is in credit-

card size, snap out the smaller seg-

ment and remove any rough edges.
• Remove the battery cover by

pressing top centre of the cover

and slide downwards.

• Insert the SIM card into the slot

with the contact area facing down-

wards

and push gently until it en-

gages below the holder (make

sure the angled corner is in the

correct position).

• Place the battery into the block of

the phone, with the contact area

facing down. Push the battery

carefully downwards.

• Slide the battery cover upwards

from the bottom of the phone, un-

til it latches into place.

Note
Always switch off phone before removing

the battery!
Only 3 V SIM cards are supported. Please

contact your service provider, if you have

an older card.

Advertising