Siemens SL55 - Manual (Page 13)

Getting started
12
SL55 Fugu, lang en, A31008-H4910-A1-1-7619 (9. January 2003, 15:00)
©
Siem
ens AG 2001
, D
:\P
oo
l\L
55\Sl55\en
Freigabe
S3\Langversi
on\SL
55_Sta
rtup
.f
m
Charge battery
The battery is not fully charged
when delivered. Plug charger cable
into the bottom of the phone, plug
power supply unit into a mains pow-
er socket and charge for at least two
hours .
Display when charging is in progress
h
During charging.
Charging time
An empty battery is fully charged af-
ter about 2 hours. Charging is only
possible within the temperature
range 5 °C to 40 °C. At 5 °C above or
below, the charge icon blinks as a
warning. The mains voltage speci-
fied on the power supply unit must
not be exceeded.
Charge icon not visible
If the battery is totally discharged, no
charge icon is displayed when the
charger is plugged in. It will appear
after two hours at most. In this case
the battery is fully charged after
3-4 hours.
Only use the charger provided!
Display while in service
Charge level display during opera-
tion (empty-full):
a d g
A beep sounds when the battery is
nearly empty. The battery level is on-
ly shown correctly during an unbro-
ken charging/discharging cycle. You
should therefore not remove the bat-
tery unnecessarily and where possible
not finish the loading process early .
Additional information
The charger heats up when used for long
periods. This is normal and not dangerous.
Outside your own home network.....p. 114
Performance....................................p. 115