Metz 40 TK 81 - Manual (Page 12)

4. Putting into Service
Switch off all devices, including the TFT monitor, before making any connections between them.
4.1 Unpacking and Positioning
Selecting the installation position
Viewing direction
• Although the TFT monitor has a very wide viewing angle, the picture will be best if you view it directly from the
front. You should therefore adjust the position of the monitor to match the most frequently used viewing direction.
Position
• Reflected light
Avoid positioning the monitor directly opposite windows or other light sources
• Access to the mains input
The mains input and the mains switch should be easily accessible at all times.
• Ventilation
Ensure that there is a space of at least 10 cm, above and below the ventilation openings, between the monitor
and any other pieces of furniture, walls, etc.
• Ambient temperature
For safe and reliable operation, the ambient temperature must lie between 5°C and 35°C.
Unpacking
☞
Place the cardboard box upright on a firm surface. The arrows on the ends of the box point to the top of the
box.
12