Setup – Siemens M50 User Manual
Page 70
Setup
68
M50 en, A31008-H5150-A1-1-7619 (1. März 2002, 17:25)
©
Siem
ens AG 2001
, L
:\MOBI
L\K45
\M50-M
anta-ne
ues D
esign\ENG
-
§Menu§
¢
Setup
¢
Connectivity
¢
Select a function:
WAP profile settings
You can set or change up to 5 WAP
profiles (may be barred by the serv-
ice provider). The entries may vary
depending on your service provider.
To set a new profile:
N
Select a profile.
§Options§
Open menu.
Change settings
Select and confirm.
N
Select profile range and
make your settings/en-
tries field by field.
§Edit§
The entry card is dis-
played.
If necessary, check with your service
provider for details:
§Save§
The settings are stored
and the profile list is
shown.
Activate the set WAP pro-
file (p. 34).
WAP pa-
rameters
IP address:
* Enter IP ad-
dress.
Port:
* Enter port number.
Homepage:
Enter homepage
(p. 32), if not set by the service
provider.
Linger time:
Enter time in
seconds after which a connec-
tion should be terminated if no
input or data exchange takes
place.
*) depends on your service
provider, if necessary enter
2nd IP address and 2nd port
~
CSD
settings
(Circuit
Switched
Data)
Dial-up no.:
Enter ISP
number.
Call type:
Select ISDN or An-
alogue.
Login name:
Enter login
name.
Password:
Enter password
(shown as a series of aster-
isks).
GPRS
settings
(General
Packet
Radio
Service)
activated/deactivated:
Acti-
vate/deactivate
APN:
Enter the address of
your service provider.
Login name:
Enter login
name.
Password:
Enter password
(shown as a series of aster-
isks)
Note
As an alternative method to set/change a
new profile, you can use the browser menu:
†
Call up the menu.
More ...
Select.
WAP Profiles
Select.