Getting started – Siemens Xelibri 4 User Manual

Page 4

Advertising
background image

3

Getting Started

Inserting SIM card

Your network provides you with a SIM card.
If it is delivered credit card size, snap out the smaller
segment and remove any rough edges.
1. Gently withdraw the charger socket cover.
2. Using both thumbs, snap open cover.
3. Remove cover.

4. Insert SIM card, ensuring cut off corner is correctly

positioned, sliding it under metal guide to position
shown.

5. Insert battery, ensuring tabs on left are engaged

(slots marked

A

) before clicking in place. To

remove battery later, move catch outwards whilst lift-
ing right side.

6. Replace cover, engaging top end before clicking

closed.

Charging

When delivered, your battery will not be fully charged.
Allow 2-3 hours for a full charge.
Insert the charger in an easily accessible AC power
socket, it can only be switched off by unplugging it.
Remove the charger cover, plug into the base of phone
with the metal plate to the rear.
While it charges, you’ll see this symbol: h
If you don’t see the symbol, see What if...? on p 23.

jedi.book Seite 3 Mittwoch, 12. März 2003 1:02 13

Advertising