Maretron J2K100 - Manual

www.maretron.com 1-866-550-9100
32
Maretron’s J2K100 attaches directly into
J1939 networks of compatible engines,
transmissions, and gensets and converts
the J1939 data to the new marine digital
interface (NMEA 2000
® ). Critical engine,
transmission, and genset data is then
distributed throughout the vessel over a
single cable where it can be monitored by
any NMEA 2000
® compatible display.
The J2K100 can also be used as part of a
complete fuel computer. Simply connect the
J2K100 together with Maretron universal
displays (DSM200/DSM250/N2KView
® ) and
GPS antenna/receiver (GPS100) and you
have a system capable of displaying gallons
per hour and/or miles per gallon.
The J2K100 converts the
following information:
• AC Generator Current
• AC Generator Frequency
• AC Generator Voltage
• Tachometer
• Engine Hours
• Coolant Pressure
• Coolant Water Temperature
• Engine Oil Pressure
• Engine Oil Temperature
• Boost Pressure
• Fuel Rate Monitoring
• Charging Voltage
• Percent Engine Load
• Percent Engine Torque
• Rated Engine Speed
• VIN
• Software ID
• Transmission Gear
• Transmission Oil Pressure
• Transmission Oil Temperature
J2K100
J1939 to NMEA 2000 ®
Gateway
The J2K100 is compatible with
any engine, transmission, or
genset equipped with a J1939
interface, including products
from the following manufacturers:
• Caterpillar
• Cummins
• Detroit Diesel
• John Deere
• Kohler
• Northern Lights
• Onan
• Perkins
• Steyr
• Volvo Penta
• Yanmar
Products
PART NUMBER DESCRIPTION
J2K100-01 J1939 to NMEA 2000® Gateway
MCF-2M-D4 J2K100 adapter Micro female to Deutsche 4 Pin 2 Meter Cordset
M CF-2M-D12 J2K100 adapter Micro female to Deutsche 12 Pin 2 Meter Cordset
MCF-2M-D12CAT J2K100 adapter Micro female to Deutsche 12 Pin 2 T cable