Magellan eXplorist 200 - Manual (Page 40)

Points of Interest 35
Copying a Preloaded POI
POIs that have been preloaded as part of the background map can be saved as a user-entered
POIs. Preloaded POIs cannot be deleted; it just copies it to the
My Points of Interest
portion of the database.
1. Press MENU.
2. Use the Arrow joystick to highlight Pts of Interest.
3. Press ENTER.
4. Use the Arrow joystick up/down to highlight Background Map.
5. Use the Arrow joystick left/right to select Nearest or Alphabetical.
6. Press ENTER.
7. [Only if Alphabetical selected] Use the Arrow joystick and the ENTER button to
enter the first few characters of the POI you are searching for. Highlight
OK and
press ENTER to continue.
8. Use the Arrow joystick to highlight the POI to be copied.
9. Press ENTER.
10. Use the Arrow joystick to highlight Save.
11. Press ENTER.
Steps 12 through 14 are optional.
12. Use the Arrow joystick to highlight the field you want to change.
13. Press ENTER.
14a. If the Icon field was selected: Use the Arrow joystick to select the icon desired and
press ENTER. To aid in your selection, the type of icon selected is displayed in the
information block at the top of the keypad.
14b. If the Name field was selected: Use the Arrow joystick to select the character
desired and press ENTER. If you make a mistake, highlight Back and press
ENTER. To access the lower-case characters, highlight Shift and press ENTER.
To clear everything and start over, highlight CLEAR and press ENTER. When you
are satisfied with the name, highlight
OK and press ENTER.
Note: User-entered POI names can be only eight characters long (including
spaces).
14c. If the Message field was selected: Use the keypad displayed, just as was described
in 14b, to enter a message for this POI.
15. When the Icon, Name and Message fields are ready, use the Arrow joystick to
highlight Save.
16. Press ENTER.