MGE UPS Systems SNMP 10BT - Manual (Page 5)

51029486EN/AA - Page 5
1
2
3
1. Presentation
1.3 Functions
The SNMP 10BT communication card is an agent for UPS supervision using the SNMP protocol. It provides a number of
objects (MIB) on the Ethernet 10BT network and makes it possible for a number of different remote machines to supervise
the UPS and protect computer data (orderly system shutdown).
It may be used in all UPSs equipped with UPS BUS communications slots or in a MultiSlot module.
1.4 Overview
Key:
␣ 1 Red Tx LED:
- On: card energised.
- Flashing: data emission.
␣ 2 Green Lk / Rx LED:
- On: Ethernet connection OK.
- Flashing: data reception.
␣ 3 Ethernet 10BT RJ45 connector.
␣ 4 Reset button.
␣ 5 UPS BUS internal bus.
␣ 6 Jumper for network-parameter selection.
␣ 7 MAC-address label.
1
5
3
4
6
7
2