Motorola FLX4 User Manual
Page 18
16
Battery Information
Your message receiver is designed to operate with a sin-
gle
AA
-size alkaline battery (carbon zinc batteries are not
recommended). See the diagram for the battery door
location.
To install or replace the battery, place the message
receiver face down and proceed as follows:
➊
Unlock the battery door by sliding the door latch
away from the battery door.
➋
Slide the battery door in the direction of the arrow
(toward the outer edge).
➌
Lift the battery door away from the housing to
remove it. Lift the battery out of the battery compart-
ment, taking note of the positive (+) and negative (-)
markings on the battery and the message receiver
housing.
To install a new battery, reverse this procedure, taking
note of the positive (+) and negative (-) markings.
CAUTION: Do not insert the battery backwards or the
messages stored or locked in memory will be erased.
Ì
➊
➋
➌
SCRIPTOR LX4/FLX4 Message Receiver
Battery Replacement (rear view)
1027B15.fr5 Page 16 Thursday, December 5, 1996 09:56