Maxim Integrated MAX1202 - Manual

_____MAX1202 Stand-Alone EV Kit
The MAX1202 EV kit provides a proven PC board lay-
out to facilitate evaluation of the MAX1202. It must be
interfaced to appropriate timing signals for proper
operation. Refer to the MAX1202 data sheet for timing
requirements.
Cut JU4 and apply the +5V analog supply between the
+5V pad and the pad marked GND. Connect the
VLOGIC pad to the microprocessor's power supply. Set
JU1 to the 2-3 position (V
SS = -5V) to allow input sig-
nals between ±4V (Table 1).
_______________General Description
The MAX1202 evaluation system (EV system) is a com-
plete, 8-channel data-acquisition system consisting of a
MAX1202 evaluation kit (EV kit) and a Maxim 3V
68L11D microcontroller (µC) module.
The MAX1202 is a low-power, +5V, 8-channel, 12-bit
analog-to-digital converter (ADC) that connects directly
to 3V and 5V microprocessors (µPs). Windows 3.1™/
Windows 95™ software provides a handy user interface
to exercise the MAX1202’s features.
Order the EV system for comprehensive evaluation of
the MAX1202 using a personal computer. Order the EV
kit if you have already purchased the 68L11D µC mod-
ule with a previous Maxim EV system, or for custom use
in other µC-based systems.
The MAX1202 EV kit and EV system can also be used
to evaluate the MAX1203. Simply order a free sample of
the MAX1203BCPP along with the MAX1202 EV kit. For
3V-only applications, refer to the MAX147 data sheet.
____________________________Features
♦ Proven PC Board Layout
♦ Complete Evaluation System
♦ Convenient On-Board Test Points
♦ Data-Logging Software
♦ 3V/5V Logic Interface
♦ Fully Assembled and Tested
Evaluates: MAX1202/MAX1203
MAX1202 Evaluation Kit
________________________________________________________________ Maxim Integrated Products 1
19-1197; Rev 0; 3/97
QTY DESCRIPTION
C1–C8, C13 9
C9, C10, C11,
C14, C15
5
C12 1 4.7µF, 10V tantalum capacitor
J1 1
JU1, JU2 2 3-pin jumper blocks
JU3 1
JU4 0
R1–R8 8
TP1 1 8-pin header
1 Maxim MAX1202BCPP
U2 1 Maxim ICL7660CPA
U3 1 78L05 voltage regulator
2 x 20 right-angle socket
0.1µF ceramic capacitors
0.01µF ceramic capacitors
DESIGNATION
2-pin jumper block
Open
300
Ω
, 5% resistors
____________________Component List
MAX1202EVL11
___________System Component List
______________Ordering Information
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800
None 1 PC board
None 1
Software disk,
“MAX1202 EVALUATION KIT”
Windows is a registered trademark of Microsoft Corporation.
U1
1 20-pin socket
PART
MAX1202EVKIT-DIP 0°C to +70°C
TEMP. RANGE BOARD TYPE
Through-Hole
MAX1202EVL11-DIP 0°C to +70°C Through-Hole
PART
MAX1202EVKIT-DIP
68L11DMODULE 1 68L11D µC Module
1
QTY DESCRIPTION
MAX1202 Evaluation Kit
6811D MODULE
AVAILABLE