22 copying the recorded data (continued) – MITSUBISHI ELECTRIC DX-TL4509E User Manual

Page 22

Advertising
background image

22

Copying the recorded data (continued)

Field Reverse

Click to display a still picture one field before.

Stop

Click to stop playback. Audio, if recorded, is played
back after the stop when the audio command has been
enabled.

Field Advance

Click to display a still picture one field after.

Playback

Click to playback the picture in the forward direction.

Forward Search

Click to playback the picture in the forward direction with
a higher speed than normal playback. The speed changes
from X1 to X2, X4, X8 and back to X1 at every press of
this button during playback.

to

Camera

(These buttons are displayed when the

button

located on the lower right of the Forward Search button
is pressed.) Click to display the picture of the camera
corresponding to the number of the button. The indicator
turns green for the camera number which is being
displayed, and it turns black for the camera number which
is not being displayed. The picture is not displayed even
when the indicator turns green if the data has not been
copied for that camera number.

Refresh Speed

(This slider is displayed when the

button located on the

lower right of the Camera button is pressed.) Drag with
the mouse to adjust the playback speed. When setting
to [Fast], it may disrupt the operation depending on the
performance of the personal computer used. Use this
setting with the proper picture playback speed suitable to
the personal computer used.
The playback speed slider may not be changed at a
constant interval when the data which is additionally
copied is played back.

Output

(This is displayed when the

button located on the

lower right of the Refresh Speed slider is pressed.)
[Not Synchronized playback]
Put a checkmark to [Output] on the FSMPlayerLite panel
and select a playback channel from the drop-down menu.
Then select [Not Synchro.] in the [Playback] field. Play
back the copied data and stop at a point where you want
to hear the audio. The audio data around the stop point
are played back. You can change the duration of audio
playback in 3 levels using the slide bar on the right side.
The actual duration of audio playback varies depending
on the frame rate of the recorded picture. Adjust the
duration for every data to be played back.
[Synchronized playback]
Select [Synchro.] in the [Playback] field. You can play
back simultaneously the audio and picture of the data
downloaded in blocks via network or the data copied
together with audio by a recorder. Only one playback
channel is displayed in this case. Audio is not played back
during other than normal playback (such as fast-forward
playback and reverse playback). The [LipSync] slide bar
should be adjusted according to the PC to be used and
the recording status of data to be played back. In some
cases, there may not be found an optimum position where
the picture and audio synchronize with each other.

Playback software

When copying the data to CD/DVD or USB memory, the
needed PC playback software is automatically copied on to
the disc. Refer to the following for using the software.

System requirements

• OS: Microsoft Windows 2000 or Windows XP.
• CPU: IBM PC/AT compatible with an Intel Pentium series

processor of at least 500 MHz.

• RAM: 256 MB or more.
• HDD: System drive with unused space of at least 200 MB.
• Display device: XGA (1024 pixels x 768 pixels) or higher.

Starting up the application software

step

1. Load the CD/DVD/USB memory to the personal

computer which has been used for copy.

step

2. Double-click the icon of the disc to open.

step

3. Start up the application software.

• Double-click the “FSM Player Lite.exe.” The

application software starts up and the operation
panel appears.

When the picture cannot be loaded, use the

[Folder] command in the [File] menu to select
the picture folder to be played back.

You can open the FSMPlayerLite panel in 4 stages by

clicking

on the right side. In the first stage, you can

select playback, search and bookmark operations. In the
second stage, you can select a camera to display. In the
third stage, you can adjust playback speed (reducing
only) and in the fourth stage, you can make various set-
tings for audio playback.

Operational panel

Rewind

Click to jump to the head of the recording data.

Reverse Search

Click to playback the picture in the reverse direction with
a higher speed than normal playback. The speed changes
from X1 to X2, X4, X8 and back to X1 at every press of
this button during reverse playback.

Reverse Playback

Click to playback the picture in the reverse direction.

Menu

Operational
Panel

Advertising