Manitowoc Ice Q-1400 - Manual (Page 2)

Q-DUAL Instructions
1. Remove splash shield, water pump, spacer plate between water fitting bracket and frame angle, and water trough from
ice machine. Discard spacer plate.
2. Install ice deflector, as shown, using two #10-32 mounting screws. Center ice deflector directly beneath water trough.
Ice deflector must be secured with two mounting screws for proper operation of ice machine.
4. Reassemble water trough, water pump, and splash shield.
8006893
Sheet 2 of 2
Rev. 06/13/03
Water
Pump
Splash
Shield
Water Trough
Ice Deflector
#10-32 Mounting Screws
Frame Angle
Spacer
Plate