Metz 28 AF-4 C - Manual (Page 23)

2. Preparing the mecablitz for use
23
Fig. 2: Exchanging batteries
2.2 Loading and replacing the batteries
• Switch off the flashgun with the 0 switch.
• Push the battery compartment cover in direction of
the arrow.
• Insert the dry-cell or rechargeable batteries in
longitudinal direction according to the indicated
battery symbols.
When loading the batteries ensure correct
polarity. Incorrectly loaded batteries can
destroy the flashgun! Always exchange the
complete set of 4 batteries. All batteries
must be of the same make and have the
same charge level. Use of batteries with a
differing charge level may cause flashgun
malfunctions and battery leaks!
Reclose the battery compartment cover after the
batteries have been inserted.
Exhausted batteries must not be thrown into
the dustbin! Contribute to the protection of
the environment and discard exhausted
batteries at the appropriate disposal points.
ķ
☞