Marshall electronic SD/HD Widescreen LCD Monitor V-R201P-AFHD - Manual (Page 8)

8
On-Screen Menu
STRUCTURE OVERVIEW
MAIN MENU AND NAVIGATION
Access the main menu by pushing and holding the MENU button on the front panel of the monitor until the main menu
appears (approximately 1-2 seconds).
• Step through menu items using the ↑ and ↓ buttons.
• Choose a menu item by pressing SELECT.
• Rotate through options using the ↑ and ↓ buttons.
• Choose a setting by pressing SELECT.
• Return to the previous menu by pressing MENU.
• Exit the main menu by pressing MENU. The menu will automatically
time out after 5 seconds. After exiting the menu, wait 1-2 seconds
before displaying the menu again.
MARKER 16:9
OFF, 13:9, 14:9, 4:3, 2.35:1,
1.85:1, 95%, 93%, 90%,
88%, 80%
MARKER 4:3
OFF, 95%, 93%, 90%, 88%,
80%
MARKER BACKGROUND OFF, HALF, BLACK
MARKER SETUP
CENTER MARKER OFF, ON
COLOR TEMP D55, D65, D93, USER
RED (0-100)
GREEN (0-100) ADJ COLOR BIAS
BLUE (0-100)
RED (0-100)
GREEN (0-100) ADJ COLOR GAIN
BLUE (0-100)
MONO OFF, ON
BLUE ONLY OFF, ON
PIXEL TO PIXEL OFF, ON
ASPECT RATIO 4:3, 16:9
SCAN NORMAL, UNDER
VIDEO CONFIG
DELAY OFF, H/V, V, H
SMPTE BAR OFF, ON
FUNCTION 1
DELAY, RATIO, BACK,
CENTER, MARKER, MONO,
CTEMP, PTP
FUNCTION 2
DELAY, RATIO, BACK,
CENTER, MARKER, MONO,
CTEMP, PTP
STATUS DISPLAY OFF, ON
LOAD CONFIG
USR1, USR2, USR3, USR4,
USR5, USR6, MFG
MAIN
SYSTEM CONFIG
SAVE CONFIG
USR1, USR2, USR3, USR4,
USR5, USR6
Main Menu
9
On-Screen Menu (continued)
MARKER SETUP SUBMENU
■ 16:9 Markers
Use this setting to superimpose one of 10 markers on the screen when in 16:9 mode. This setting is disabled when the
aspect ratio is set to 4:3, or when Pixel-to-Pixel, Underscan, or H/V Delay is enabled.
• OFF (No Marker)
• 13:9 Aspect Ratio
• 14:9 Aspect Ratio
• 4:3 Aspect Ratio
• 2.35:1 Aspect Ratio
• 1.85:1 Aspect Ratio
• 95% Safe Area
• 93% Safe Area
• 90% Safe Area
• 88% Safe Area
• 80% Safe Area
16:9 Marker Examples:
OFF (No Marker)
4:3 Aspect Ratio Marker 2.35:1 Aspect Ratio
90% Safe Area
Marker Setup Submenu