Minolta 800si - Manual (Page 56)

109
DATA MEMORY
108
DATA RECALL
Press the data-memory button
in the control panel.
Turn either control dial until
appears in the data
panel.
Continue turning the dial until the number
for the desired data area appears.
Press the adjust button.
• The display in the data panel shows
the aperture and shutter speed
information for the first frame.
blinks in the data panel.
SELECTING DATA MEMORY
Press the data-memory button
in the control panel.
Turn either control dial until
appears in the data panel.
• The film area where the data is to
be stored will appear in the bottom
right corner.
Press the shutter-release button partway down to enter
the selection.
• will appear in the data panel when data-memory is on.
Press the data-memory button at anytime to see
in which data area information is being
recorded.
Example: F3 indicates you are now recording in
film area 3.
CONFIRMING THE DATA AREA
✎ Turn data memory OFF using the steps above, turn either control dial
until
appears in the data panel in step 2.
Continued on next page.
2152EE 17/10/97 11:00 AM Page 108