About the leased-line operation feature – Multi-Tech Systems MT5634IND User Manual
Page 8
Chapter 2 – Installation
Multi-Tech Systems, Inc. MT5634IND User Guide (S000369A)
8
About the Leased-Line Operation Feature
The MultiModemIND can be used on a two-wire leased line.
A leased line is a private, permanent telephone connection between two points. Unlike normal dialup connections, a
leased line is always active. The modems automatically connect when they are attached to the line and are turned
on. Because a leased line is always active, one of the two modems on the line must be configured as the originate
modem and the other as the answer modem; however, it does not matter which is which.
In the event of an interruption, leased-line modems automatically reconnect when the data line or power is restored.
Setup
1.
Connect a modular telephone cable to the LINE jack. Connect the other end of the cable to a two-wire
lease-line jack or terminals supplied by the telephone company.
2.
Turn on the modem.