Midland Radio G-300 - Manual (Page 15)

http://www.midlandradio.com - 15 -
Power Selection : Your G-300 has two transmit power levels. To select the power
level on channels 1~7 and 15~22:
•
Press until the “Pr” appears on the display.
•
Press or to select between high and low power levels. The
Hi/Lo icon will alternately appear during setting.
• Press
the PTT button to save and exit.
The HI or LO icon will appear on the display depending on your setting.
Note : On channel 8~14 no power level selection is possible
VOX : VOX (voice operated transmit) operation allows you to transmit without using
the PTT button when using a headset. To enable VOX operation:
•
Insert the headset plug(s) into the SPK/MIC jacks.
•
Set the radio into VOX mode.
To set the radio to VOX Mode, repeatedly press the button until the VOX icon
flashes on the LCD display. Press the or button to turn the VOX on or off,
an “on” or “oF” will appear on the display during setting. The VOX icon will appear
on the LCD display if the radio is set into VOX mode.