MITSUBISHI ELECTRIC SE1U - Manual (Page 2)

Before Using
3 2
IMPORTANT SAFEGUARDS
Please read all these instructions regarding your LCD projector and retain them for future
reference. Follow all warnings and instructions marked on the LCD projector.
1. Read instructions
All the safety and operating instructions should be read before the appliance is
operated.
2. Retain instructions
The safety and operating instructions should be retained for future reference.
3. Warnings
All warnings on the appliance and in the operating instructions should be adhered to.
4. Instructions
All operating instructions must be followed.
5. Cleaning
Unplug this projector from the wall outlet before cleaning it. Do not use liquid aerosol
cleaners. Use a damp soft cloth for cleaning.
6. Attachments and equipment
Never add any attachments and/or equipment without the approval of the
manufacturer as such additions may result in the risk of fire, electric shock or other
personal injury.
7. Water and moisture
Do not use this projector near water or in contact with water.
8. Accessories
Do not place this projector on an unstable cart, stand, tripod, bracket or table. Use
only with a cart, stand, tripod bracket, or table recommended by the manufacturer or
sold with the projector. Any mounting of the appliance should follow the
manufacturer’s instructions and should use a mounting accessory recommended by
the manufacturer.
An appliance and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the appliance and cart combination
to overturn.
9. Ventilation
Slots and openings in the cabinet are provided for ventilation, ensuring reliable
operation of the projector and to protect it from overheating. Do not block these
openings or allow them to be blocked by placing the projector on a bed, sofa, rug, or
bookcase. Ensure that there is adequate ventilation and that the manufacturer’s
instructions have been adhered to.
10. Power sources
This projector should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power, please consult your
appliance dealer or local power company.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
NOTE:
SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
WARNING
Use the attached specified power supply
cord. If you use another power-supply cord,
it may cause interference with radio and
television reception.
Use the attached RGB cable with this
equipment so as to keep interference within
the limit of a FCC Class B device.
This apparatus must be grounded.
DO NOT LOOK DIRECTLY INTO THE
LENS WHEN THE PROJECTOR IS IN
THE POWER ON MODE.
CAUTION
Not for use in a computer room as defined
in the Standard for the Protection of
Electronic Computer/Data Processing
Equipment, ANSI/NFPA 75.
When using the projector in Europe:
COMPLIANCE NOTICE
This LCD Projector complies with the
requirements of the EC Directive 89/336/
EEC “EMC Directive” as amended by
Directive 92/31/EEC and 93/68/EEC, and
73/23/EEC “Low Voltage Directive” as
amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has
been chosen at a level that gains proper
operation in residential areas, on business
and light industrial premises and on small-
scale enterprises, inside as well as outside
of the buildings. All places of operation are
characterised by their connection to the
public low voltage power supply system.
WARNING
Use the attached RGB cable with this
equipment so as to keep interference within the
limits of an EN55022 Class B device.
Please follow WARNING instructions.