Indicators, En – 24, Normal condition abnormal condition – MITSUBISHI ELECTRIC XL1X S L 2 User Manual
Page 24: Menu enter mute, Power lamp temp condition possible solutions, Lamp indicator power indicator temp indicator, Volume source
EN – 24
Indicators
The projector has three LED Indicators which shows the working condition of the projector.
The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your
dealer.
Normal condition
Abnormal condition
Steady
red
Steady
green
Steady
green
Blinking
green
Steady
green
POWER LAMP
TEMP
CONDITION
Notes
The POWER is ON. (Normal condition)
Lamp stand-by (about for 1 minute)
The power button cannot be used to switch
ON and OFF
Stand-by
Off
Off
Off
Off
Steady
green
Blinking
green/red
Blinking
green/red
Blinking
green/red
Steady
red
Steady
green
Steady
green
Blinking
red
Blinking
red
POWER LAMP
TEMP
CONDITION
POSSIBLE SOLUTIONS
Steady
red
Blinking
red
Steady
red
Close the cover correctly.
or
or
Blinking
Blinking
Abnormal.
Contact your dealer.
Off
Off
Steady
red
Blinking
green
Off
Off
Off
Off
Off
Steady
red
Steady
Steady
Unusual temperature
• The ventilation slits or air filter is clogged with
dust or debris.
• The room temperature is too high.
• The filter is dirty.
• Remove the object from the ventilation
slits.
• Relocate the projector to a cooler place.
• Clean the filter.
Replace the lamp.
Exchange with a new lamp if the same
problem recurs.
• Wait until the LAMP indicator is turned
off, then press the POWER button.
• If the above operation is not effective,
replace the lamp.
The lamp cover is not closed.
The protection circuit is working or the lamp is in an
abnormal condition.
(The indicators operate as shown on the left at the time of
power-off, too. In this case, they are’nt indicating an
abnormal condision.)
The lamp operation time exceeds the time elapsed until the
lamp shutdown notice. (See page 21.) The POWER is on.
The lamp operation time exceeds the time elapsed until the
lamp shutdown notice. (See page 21.) The POWER is off.
The lamp operation time exceeds the time elapsed until the
lamp shutdown. (See page 21.)
LAMP indicator
POWER indicator
TEMP indicator
TEMP
LAMP
VOLUME
SOURCE
COMPUTER
VIDEO
AUTO
POSITION
MENU
ENTER
MUTE