Matsushita CF-W4GWCZZ - Manual (Page 25)

3.4. Solenoid Wire Rod processing
Solenoid with cable
Inserts under the rib
Disk Cover Lock
Inserts between ribs
Up that there is no screw hole
The Solenoid with the cable is made
on the Disk Cover Lock
Solenoid Cable
3.5. Switch Board assembly specification
SW Board FFC
SW Board
Disk Eject Knob
Screw
Tape
To confirms that the Lever of the switch has been
surely inserted in the ditch of the knob
Central suiting
with the pin
0 1mm
0 1mm
0 1mm
Terminal Side
Fold as valley type
Suiting with shape of case
Suiting with
shape of board
SW Board FFC
Connection to SW Board Affixation of PET Tape
Pin
3.6. Speaker installation and Line processing
Affixation of Speaker Ring
Put it according to the shape of the rib.
Note not running aground in the rib.
Speaker Cable
Speaker
Soldering Soldering
Black Line Red Line
Soldering of Speaker Cable
Speaker Ring
Rib
Rib
3-5