Insignia NS-CLVR01 - Manual

Actual product may vary from image shown.
Quick Setup Guide
NS-CLVR01 Clock Radio with Voice Command
Congratulations on your purchase of a high-quality Insignia product.
Your NS-CLVR01 represents the state of the art in clock radio design
and is designed for reliable and trouble-free performance.
NOTE: Voice commands are recognized in English only
Package contents
• Clock radio
• AC power adapter
• AAA alkaline batteries (3)
• User Guide
• Quick Setup Guide
Features
Front view
Setting up your clock radio
Installing the backup batteries
1 Open the battery compartment cover located on the bottom of
your clock radio.
2 Insert three “AAA” batteries, checking that the polarity (+ and -
ends of the batteries) matches the drawing inside the battery
compartment. We recommend the use of alkaline batteries for
longer
life.
3 Close the battery compartment cover.
Connecting the AC power adapter
1 Plug the small DC power connector into the DC IN 9V jack on the
back of your clock radio.
2 Plug the AC adapter into an AC power outlet.
NOTE: Remove both the DC plug and the AC-IN plug to disconnect the AC power
adapter when not in use.
Use only the supplied AC power adapter to power your clock radio.
Record button
LCD
display
Speakers and
microphone
Volume up button
Top view
Volume down button
Snooze/sleep/voice
command button
Tune up button
/source button
Tune down button
Preset button
Back view
DC in jack VC On/Off button
AUX in jack Alarm 2 button
FM antenna (wire) Alarm 1 button
Dimmer button Minute button
Time set button Hour button