IMC Networks iMcV-Giga-FiberLinX-II User Manual
Imcv-giga-fiberlinx-ii operation manual
Advertising
Table of contents
Document Outline
- FCC Radio Frequency Interference Statement
- Warranty
- I - About the iMcV-Giga-FiberLinX-II
- II - LED Operation
- III - Hardware Configuration
- IV - Installation Instructions
- V - Software Configuration
- VI - Using Telnet
- Serial Configuration/Telnet Session
- Basic Device Configuration
- Saved and Current Values
- Commands List
- (I) - Assigning IP Information
- (P) - Password Protection/Changing Passwords
- (T) - Assigning SNMP Trap Destinations
- (K) - Removing All SNMP Trap Destinations
- (C) - Creating SNMP Community Strings
- (U) - Deleting All SNMP Community Strings
- (E) - Ending Your Session
- (REBOOT) – Reboot Device
- (D) – Enabling DHCP
- (Space Bar)—Commands List
- Transparent Mode
- VLAN Mode Screen
- Unit Configuration—unit
- Bandwidth Configuration—bw
- VII - Application Overview
- VIII - Application Examples
- IX - Troubleshooting
- IMC Networks Technical Support
- Specifications
- Standards/Compliance
- Serial Port Pinout
- Safety Certifications